RS PRO 24V dc 3W Replacement Solenoid Coil, Compatible With MH Series, MNH Series

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: HU
Productomschrijving

NAMUR Solenoid-Spring Valves

NAMUR Solenoid-Spring Valves are often found within chemical, pharmaceutical, water, and food and drink industries to control compatible pneumatic actuators with NAMUR interfaces. The 5/2 way RS NAMUR valve may be converted (using the conversion plate supplied) to a 3/2 way valve, and air recirculation. These NAMUR Solenoid-Spring Valves from RS, suitable for operating in environments from -10°C to +50°C, can work in pressure ranges from 2 to 10 bar and provide a maximum flow rate of 1250 litres per minute.

Note

The NAMUR Solenoid-Spring Valve requires a compatible coil to operate (784-0082).

RS Control Valves and Accessories

RS Spool Valves, Spool Valve Bodies, NAMUR Solenoid-Spring Valves, Power Take-Off (PTO) Valves, Intrinsically Safe (ATEX approved) Solenoid-Spring Valves and the Filter-Regulator-Lubricator (FRL) Portable Air Cradle, suitable for use within a variety of general pneumatic, industrial, automation and control applications.

Specificaties
Kenmerk Waarde
Manufacturer Series MA
Compatible With MH Series, MNH Series
Power Supply Voltage 24V dc
Power Consumption 3W
39 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
182 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
4,47
(excl. BTW)
5,41
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 4,47
5 - 9
€ 4,33
10 +
€ 4,19
Related Products
The Norgren QM series 240VAC replacement solenoid coil ...
Description:
The Norgren QM series 240VAC replacement solenoid coil is compatible with X series. It consumes 5VA power. It is modular with orientable solenoid coils and plugs for easy installation. It is often used for the control mechanism.Note:FS = Fully sealed ...
The RS Pro valve range is robust , ...
Description:
The RS Pro valve range is robust , versatile and combines high performances with compact installation dimensions. Solenoid, electrical, mechanical and manual operated. Large flow capacity , short change-over times and low change-over pressure. Available in 3 sizes: 1/8 - ...
The Festo MSFW series F solenoid coil is ...
Description:
The Festo MSFW series F solenoid coil is used to control a hydraulic solenoid valve wears out or stops functioning without plug socket assembly. It has a coil voltage of 48VAC. Minimum pickup time - 10 MsDuty cycle - 100%Power ...
The Festo's solenoid coil use with pneumatic application. ...
Description:
The Festo's solenoid coil use with pneumatic application. They have been designed to operate in aggressive conditions and fluctuating temperature. Its holding power is 2.7VA with 100% of duty cycle which has 48V DC operating voltage. It used type B ...