Maxim Integrated RF Amplifier Low Noise 18.3 dB, 4-Pin 500 MHz SOT-143

RS-stocknr.:: 190-8050P
Fabrikantnummer:: MAX2611EUS+T
Fabrikant:: Maxim Integrated

Maxim Integrated RF Amplifier Low Noise 18.3 dB, 4-Pin 500 MHz SOT-143

Subtotaal 5 eenheden (geleverd op een doorlopende strip)*

€ 4,13

(excl. BTW)

€ 4,995

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 75,00

Wordt opgeheven

Laatste 4.230 stuk(s), klaar voor verzending vanaf een andere locatie

Aantal stuks	Per stuk
5 +	€ 0,826

*prijsindicatie

RS-stocknr.:: 190-8050P
Fabrikantnummer:: MAX2611EUS+T
Fabrikant:: Maxim Integrated

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Maxim Integrated
	Amplifier Type	Low Noise
	Operating Frequency	500 MHz
	Product Type	RF Amplifier
	Technology	Si
	Gain	18.3dB
	Mount Type	Surface
	Package Type	SOT-143
	Maximum Supply Voltage	5V
	Pin Count	4
	Minimum Operating Temperature	-40°C
	P1dB - Compression Point	13dBm
	Third Order Intercept OIP3	13dBm
	Noise Figure	3.5dB
	Maximum Operating Temperature	85°C
	Length	3.04mm
	Width	1.4 mm
	Height	1.07mm
	Standards/Approvals	No
	Automotive Standard	No

	Alles selecteren
	Merk Maxim Integrated
	Amplifier Type Low Noise
	Operating Frequency 500 MHz
	Product Type RF Amplifier
	Technology Si
	Gain 18.3dB
	Mount Type Surface
	Package Type SOT-143
	Maximum Supply Voltage 5V
	Pin Count 4
	Minimum Operating Temperature -40°C
	P1dB - Compression Point 13dBm
	Third Order Intercept OIP3 13dBm
	Noise Figure 3.5dB
	Maximum Operating Temperature 85°C
	Length 3.04mm
	Width 1.4 mm
	Height 1.07mm
	Standards/Approvals No
	Automotive Standard No

Datasheet MAX2611EUS+T

The MAX2611 is a low-voltage, low-noise amplifier for use from DC to microwave frequencies. Operating from a single +5V supply, it has a 3dB bandwidth of 1100MHz. The MAX2611's low noise figure and high drive capability make it ideal for a variety of transmit, receive, and buffer applications.

In a typical application, the only external components needed are input and output blocking capacitors and a VCC series resistor. To improve gain and output power, an RF choke can be added in series to the bias resistor.

The MAX2611 comes in a 4-pin SOT143 package, requiring minimal board space.

Single +5V Supply Operation

3dB Bandwidth: DC to 1100MHz

High Gain: 18dB at 500MHz

Low Noise Figure: 3.5dB at 500MHz

High Drive Capability: +3dBm at 16mA ID

Ultra-Small SOT143 Package

Applications

Global Positioning Systems (GPS)

ISM Radios

Land Mobile Radios

Satellite Receivers

Set-Top Boxes

TV Tuners

Wireless Local Area Networks (WLANs)

Wireless Local Loop (WLL)

Maxim Integrated RF Amplifier Low Noise 18.3 dB, 4-Pin 500 MHz SOT-143

GRATIS bezorging voor bestellingen van meer dan € 75,00

Gerelateerde Links