Huber+Suhner 6830.17.A RF AttenuatorStraight 1 dBMaleFemale

RS-stocknr.:: 716-5123
Artikelnummer Distrelec:: 302-47-145
Fabrikantnummer:: 6830.17.A
Fabrikant:: Huber+Suhner

Huber+Suhner 6830.17.A RF AttenuatorStraight 1 dBMaleFemale

Subtotaal (1 eenheid)*

€ 211,25

(excl. BTW)

€ 255,61

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

Plus verzending 9 stuk(s) vanaf 20 juli 2026
Plus verzending 2 stuk(s) vanaf 27 juli 2026
Plus verzending 3 stuk(s) vanaf 07 september 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 211,25

*prijsindicatie

RS-stocknr.:: 716-5123
Artikelnummer Distrelec:: 302-47-145
Fabrikantnummer:: 6830.17.A
Fabrikant:: Huber+Suhner

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Huber+Suhner
	Product Type	RF Attenuator
	Interface Type	N Plug to N Socket
	Impedance	50Ω
	Maximum Frequency	24GHz
	Body Plating	Sucoplate
	Contact Plating	Gold
	Contact Material	Brass
	Low Power	Yes
	Orientation	Straight
	Minimum Operating Temperature	-55°C
	Minimum Frequency	4GHz
	Connector Type	Type N
	Maximum Attenuation	1dB
	Maximum Operating Temperature	130°C
	Connector Gender A	Male
	Connector Gender B	Female
	Standards/Approvals	No

	Alles selecteren
	Merk Huber+Suhner
	Product Type RF Attenuator
	Interface Type N Plug to N Socket
	Impedance 50Ω
	Maximum Frequency 24GHz
	Body Plating Sucoplate
	Contact Plating Gold
	Contact Material Brass
	Low Power Yes
	Orientation Straight
	Minimum Operating Temperature -55°C
	Minimum Frequency 4GHz
	Connector Type Type N
	Maximum Attenuation 1dB
	Maximum Operating Temperature 130°C
	Connector Gender A Male
	Connector Gender B Female
	Standards/Approvals No

RF ATTENUATOR: Type 6830.17.A Data Sheet

Land van herkomst:: CH

Huber+Suhner RF Attenuator, 1dB Maximum Attenuation, 12.4GHz Maximum Frequency - 6830.17.A

This RF attenuator is a low-power inline device designed to reduce signal amplitude in 50Ω coaxial systems while maintaining connector continuity. It uses a Type N male to Type N female Interface and is built for straight inline installation in test, measurement and signal-conditioning setups where minimal insertion-loss adjustment is required.

Features and Benefits:

• 1 dB attenuation delivering fine, predictable signal reduction
• Operates up to 12.4 GHz enabling wideband RF testing
• 50Ω impedance ensuring system matching and minimal reflections
• Gold-plated contacts for low contact resistance and corrosion resistance
• Brass contact core providing mechanical strength and conductivity
• Withstands -55°C to 130°C for reliable thermal performance

Applications

• Suitable for laboratory RF level calibration and verification
• Ideal for component characterisation in production test rigs
• Used for signal conditioning in automation measurement chains
• Can be used for attenuation in antenna feedline evaluations
• Used with coaxial test fixtures in electronics development

What connector types are fitted to the unit?

It has a male Type N plug on one end and a female Type N socket on the other for direct coaxial mating.

Is this attenuator suitable for high-temperature environments?

Yes, materials and construction support continuous operation between -55°C and 130°C.

Does it maintain system impedance across frequency?

The device is specified for 50Ω characteristic impedance to preserve matched conditions up to its maximum frequency.

Can it be used where very low power handling is required?

It is designated for low-power applications and is intended for signal-level adjustments rather than power-dissipation tasks.