TE Connectivity Double Pole Double Throw (DPDT), Latching Rocker Switch Panel Mount

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: JP
Productomschrijving

Miniature Lever/Rocker Switches

Switches with body and switch mechanism identical to the miniature toggle switches with silver contacts, but fitted with alternative style of actuators in a choice of colours
Each switch is supplied with an optional black bezel that may be fitted by snapping it over the flanges on two sides of the switch, prior to fitting to a panel by means of clipping the frame into a prepared cut-out (hole cutter see stock no. 545-323 is suitable)
These switches have the advantage of toggle switch design, compact dimensions, and are useful where toggle levers are undesirable
The use of alternative styles and colours allows the possibility of coding switch functions
Contact Rating-A 6A
Contact Rating-V 28Vdc/250 Vac

Approvals

UL; CSA

Specificaties
Kenmerk Waarde
Contact Configuration Double Pole Double Throw (DPDT)
Switch Operation Latching
Panel Cut Out Width 13mm
Panel Cut Out Height 15.9mm
Contact Current Rating 6 A @ 250 V ac
Mounting Type Panel Mount
Terminal Type Wire Lead
Panel Cut Out Size 15.9 x 13mm
Contact Material Silver Alloy
Operating Temperature Range -20 → +80°C
Mechanical Life 100000Operations
Maximum Operating Temperature +80°C
Minimum Operating Temperature -20°C
12 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
Was € 45,30
22,88
(excl. BTW)
27,68
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 22,88
Related Products
Single pole 10A/24Vdc rocker switch cases, fitted with ...
Description:
Single pole 10A/24Vdc rocker switch cases, fitted with 6.35x0.8mm quick connect terminalsIlluminated version has 24V red LED's, with up to 6 terminalsSuitable actuators should be ordered separately (see typically 507-267 and range)Rear crimp connector housing 507-560 also available, to facilitate ...
Double pole 10A/24Vdc 'snap-in' rocker switch cases, fitted ...
Description:
Double pole 10A/24Vdc 'snap-in' rocker switch cases, fitted with 6.35x0.8mm quick connect terminalsAvailable in non illuminated or LED illuminated versions (with 12V or 24V red, green or amber single or twin LED's)A large variety of switch configurations and actuator colours/markings ...
The GW Series rocker switches are extremely thin ...
Description:
The GW Series rocker switches are extremely thin allowing high density PCB mounting. GW are ideal for handheld equipment. Combined dust cover and close fitted housing, actuator and interior pivot providing contact protection. Variety of coloursDetent mechanism designExceptionally thin sizeSTC ...
A high capacity screw mounted rocker switch designed ...
Description:
A high capacity screw mounted rocker switch designed as a double break device. Made from polycarbonate resin with a steel and chrome plated mounting frame. A neon lamp with built in ballast resistor is a highly important part of the ...