INA M35 x 1.5 in Steel Rod End, 40mm Bore Metric

RS-stocknr.:: 312-945
Fabrikantnummer:: GIHRK40-DO-B
Fabrikant:: INA

INA M35 x 1.5 in Steel Rod End, 40mm Bore Metric

Bekijk alle Rod Ends

Subtotaal (1 eenheid)*

€ 214,21

(excl. BTW)

€ 259,19

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Voorradig bij de fabrikant

Klaar voor verzending vanaf 08 december 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 214,21

*prijsindicatie

RS-stocknr.:: 312-945
Fabrikantnummer:: GIHRK40-DO-B
Fabrikant:: INA

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	INA
	Product Type	Rod End
	Connection Size	M35 x 1.5 in
	Bore Diameter	40mm
	Material	Steel
	Dynamic Load Rating	127000N
	Thread Standard	Metric
	Static Load Rating	228000N
	Minimum Operating Temperature	-60°C
	Connection Gender	Female
	Outside Diameter	62mm
	Maximum Operating Temperature	+200°C
	Overall Width	135mm
	Thread Direction	Right Hand
	Standards/Approvals	No

	Alles selecteren
	Merk INA
	Product Type Rod End
	Connection Size M35 x 1.5 in
	Bore Diameter 40mm
	Material Steel
	Dynamic Load Rating 127000N
	Thread Standard Metric
	Static Load Rating 228000N
	Minimum Operating Temperature -60°C
	Connection Gender Female
	Outside Diameter 62mm
	Maximum Operating Temperature +200°C
	Overall Width 135mm
	Thread Direction Right Hand
	Standards/Approvals No

Datasheet - GIHRK40-DO-B

Vrijgesteld

Land van herkomst:: DE

Schaeffler Rod End, 62mm Outside Diameter, Steel - GIHRK40-DO-B

This rod end is a precision mechanical joint designed to transmit loads and permit angular misalignment in linking assemblies. It is constructed in steel for structural strength and is intended for use where robust axial and lateral load handling is required across a wide temperature range. The component incorporates a metric right-hand threaded connection and a central bore to accept mating shafts or pins.

Features and Benefits:

• Static load capacity 228000N delivers high axial resistance
• Dynamic load rating 127000N supports cyclical loading conditions
• Operable from -60°C to +200°C endures extreme temperature variation
• Metric M35 x 1.5 connection allows standard threaded integration
• Right-hand thread simplifies conventional installation procedures

Applications

• Suitable for heavy machinery pivot connections
• Ideal for linkage assemblies in thermal environments
• Used with shafts requiring a 40mm bore fit
• Can be used for load-bearing joints in fabrication
• Suitable for systems needing a 62mm external Interface

What is the internal mating size required for pin installation?

The internal aperture accepts a 40mm diameter shaft or pin.

Which thread specification should the mating component provide?

The mating part must match an M35 x 1.5 metric right-hand thread.

What material characteristics affect wear and strength?

The body is MADE from steel, providing structural rigidity and load endurance.

How wide is the component across the bearing assembly?

The overall width measures 135mm.