- RS-stocknr.:
- 506-189
- Fabrikantnummer:
- 22208E
- Fabrikant:
- SKF
1 op voorraad - levertijd is 1 werkdag(en).
Toegevoegd
Prijs Per stuk
€ 89,36
(excl. BTW)
€ 108,13
(incl. BTW)
Aantal stuks | Per stuk |
1 - 4 | € 89,36 |
5 - 9 | € 85,78 |
10 - 24 | € 83,99 |
25 + | € 82,23 |
- RS-stocknr.:
- 506-189
- Fabrikantnummer:
- 22208E
- Fabrikant:
- SKF
Datasheets
Wetgeving en compliance
N.v.t.
- Land van herkomst:
- GB
Productomschrijving
SKF Spherical Roller Bearings
SKF Spherical Roller Bearings offer an attractive combination of design features, which make them irreplaceable in many demanding applications.
Self-aligning - allows misalignment between shaft and housing without increase of friction and without reduction of bearing life
Very high Load Carrying Capacity - Optimum layout inside available cross-section provides maximum radial and axial load carrying capacity
Robust - Insensitive to misalignment caused by shaft or housing deflection due to heavy load
Easily fitted for loads in all directions - The bearings are non-separable and ready to install using a number of mounting methods
Easy bearing application - The favourable design characteristics and mounting enable for a more efficient and compact machine design
Very high Load Carrying Capacity - Optimum layout inside available cross-section provides maximum radial and axial load carrying capacity
Robust - Insensitive to misalignment caused by shaft or housing deflection due to heavy load
Easily fitted for loads in all directions - The bearings are non-separable and ready to install using a number of mounting methods
Easy bearing application - The favourable design characteristics and mounting enable for a more efficient and compact machine design
Spherical Roller Bearings with integral seals BS2 Series offer additional benefits:
Protection against contamination - SKF sealed spherical roller bearings are especially suited for bearing positions where, because of limited space or for cost reasons, effective external seals cannot be provided
Grease Retention - Contact seals on both sides of the bearing retain the factory filled grease where it is required: inside the bearing
Minimum maintenance requirements - Under normal operating conditions, sealed spherical roller bearings are maintenance free, keeping costs and grease consumption low
Grease Retention - Contact seals on both sides of the bearing retain the factory filled grease where it is required: inside the bearing
Minimum maintenance requirements - Under normal operating conditions, sealed spherical roller bearings are maintenance free, keeping costs and grease consumption low
Specificaties
Kenmerk | Waarde |
---|---|
Inside Diameter | 40mm |
Outside Diameter | 80mm |
Roller Bearing Type | Spherical |
Race Width | 23mm |
Bore Type | Parallel |
Material | Metal |
Static Load Rating | 90kN |
Cage Material | Steel |
Number of Rows | 2 |
Dynamic Load Rating | 96.5kN |
End Type | Open |
Limiting Speed | 11000rpm |
Reference Speed | 8000rpm |
Fatigue Limit Load | 9.8kN |