SKF NK50/35TN 50 mm ID Roller Bearing Needle, 62 mm OD
- RS-stocknr.:
- 513-773
- Fabrikantnummer:
- NK50/35TN
- Fabrikant:
- SKF
Afbeelding representeert productcategorie
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal (1 eenheid)*
€ 55,10
(excl. BTW)
€ 66,67
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 14 juli 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 55,10 |
| 5 - 9 | € 52,89 |
| 10 - 24 | € 51,78 |
| 25 + | € 50,67 |
*prijsindicatie
- RS-stocknr.:
- 513-773
- Fabrikantnummer:
- NK50/35TN
- Fabrikant:
- SKF
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 50mm | |
| Race Width | 35mm | |
| Bore Type | Parallel | |
| Roller Material | Carbon Chrome Steel | |
| Cage Material | Reinforced Nylon | |
| Bearing Material | Carbon Chromium Steel | |
| Dynamic Load Rating | 49.5kN | |
| Outside Diameter | 62mm | |
| Maximum Speed - Grease | 5600rpm | |
| Limiting Speed | 9000rpm | |
| Static Load Rating | 110kN | |
| End Type | Open | |
| Standards/Approvals | ISO 199:1997, ISO 14001, ISO 5753:1991, ISO 1000:1992, DIN 17 230:1980, ISO 582:1995, ISO 492:1994 | |
| Maximum Speed - Oil | 8000rpm | |
| Bearing Type | Needle | |
| Alles selecteren | ||
|---|---|---|
Merk SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 50mm | ||
Race Width 35mm | ||
Bore Type Parallel | ||
Roller Material Carbon Chrome Steel | ||
Cage Material Reinforced Nylon | ||
Bearing Material Carbon Chromium Steel | ||
Dynamic Load Rating 49.5kN | ||
Outside Diameter 62mm | ||
Maximum Speed - Grease 5600rpm | ||
Limiting Speed 9000rpm | ||
Static Load Rating 110kN | ||
End Type Open | ||
Standards/Approvals ISO 199:1997, ISO 14001, ISO 5753:1991, ISO 1000:1992, DIN 17 230:1980, ISO 582:1995, ISO 492:1994 | ||
Maximum Speed - Oil 8000rpm | ||
Bearing Type Needle | ||
Vrijgesteld
- Land van herkomst:
- DE
SKF Machine Needle Roller Bearings Series NK
SKF Needle Roller Bearings have low sectional height and very high load carrying capacity for their size.
Needle roller without inner ring
Needle Roller Bearings with flanges in the outer ring and diameters up to and including 17mm are produced with inserted closure rings, are without lubrication and do not have an annular groove
The larger bearings have integral flanges, an annular groove and, depending on size, one or more lubrication holes in the outer ring
Can be used where the shaft is hardened and ground, the bearing runs on the shaft
Displacement is limited to the width of the raceway
Gerelateerde Links
- NTN NK50/25RCT 50 mm ID Needle Roller Thrust Bearing Needle Roller 62 mm OD
- NTN NK50/35R 50 mm ID Roller Bearing Machined-ring 62 mm OD
- NTN NK50/35R+1R45X50X35 45 mm ID Roller Bearing Needle Roller, 62 mm OD
- INA NK50/25-TV-XL 50 mm ID Roller Bearing Needle, 62 mm OD
- INA NK50/35-TV-XL 50 mm ID Roller Bearing Needle, 62 mm OD
- NTN NK50/25RCT+1R45X50X25 45 mm ID Needle Roller Thrust Bearing Needle Roller 62 mm OD
- SKF NKXR 50 Z 50 mm ID Roller Bearing Needle Roller, 62 mm OD
- SKF NKX 50 50 mm ID Roller Bearing Thrust Ball 62 mm OD