SKF NU 2308 ECP 40 mm ID Cylindrical Roller Bearing, 90 mm OD
- RS-stocknr.:
- 586-895
- Fabrikantnummer:
- NU 2308 ECP
- Fabrikant:
- SKF
Subtotaal (1 verpakking van 5 eenheden)*
€ 429,80
(excl. BTW)
€ 520,06
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 03 september 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Verpakking(en) | Per verpakking | Per stuk* |
|---|---|---|
| 1 + | € 429,80 | € 85,96 |
*prijsindicatie
- RS-stocknr.:
- 586-895
- Fabrikantnummer:
- NU 2308 ECP
- Fabrikant:
- SKF
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SKF | |
| Product Type | Cylindrical Roller Bearing | |
| Inside Diameter | 40mm | |
| Race Width | 33mm | |
| Bore Type | Parallel | |
| Cage Material | Non-Metallic | |
| Roller Material | Bearing Steel | |
| Bearing Material | Steel | |
| Number of Rows | 1 | |
| Limiting Speed | 9500rpm | |
| Series | NU | |
| Standards/Approvals | RoHS Compliance | |
| Outside Diameter | 90mm | |
| Dynamic Load Rating | 129kN | |
| End Type | Open | |
| Alles selecteren | ||
|---|---|---|
Merk SKF | ||
Product Type Cylindrical Roller Bearing | ||
Inside Diameter 40mm | ||
Race Width 33mm | ||
Bore Type Parallel | ||
Cage Material Non-Metallic | ||
Roller Material Bearing Steel | ||
Bearing Material Steel | ||
Number of Rows 1 | ||
Limiting Speed 9500rpm | ||
Series NU | ||
Standards/Approvals RoHS Compliance | ||
Outside Diameter 90mm | ||
Dynamic Load Rating 129kN | ||
End Type Open | ||
- Land van herkomst:
- DE
The SKF Single row cylindrical roller bearings are designed to accommodate high radial loads in combination with high speeds. Having two integral flanges on the outer ring and no flanges on the inner ring, NU design bearings can accommodate axial displacement in both directions. An important feature is the separable design, which facilitates mounting and enables the bearing components to be interchanged.
High radial load carrying capacity
Low friction
Long service life
Accommodate axial displacement in both directions
Separable design