SKF NUP 2309 ECP 45 mm ID Cylindrical Roller Bearing, 100 mm OD
- RS-stocknr.:
- 586-901
- Fabrikantnummer:
- NUP 2309 ECP
- Fabrikant:
- SKF
Subtotaal (1 verpakking van 5 eenheden)*
€ 671,78
(excl. BTW)
€ 812,85
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 01 september 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Verpakking(en) | Per verpakking | Per stuk* |
|---|---|---|
| 1 + | € 671,78 | € 134,356 |
*prijsindicatie
- RS-stocknr.:
- 586-901
- Fabrikantnummer:
- NUP 2309 ECP
- Fabrikant:
- SKF
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SKF | |
| Product Type | Cylindrical Roller Bearing | |
| Inside Diameter | 45mm | |
| Race Width | 36mm | |
| Bore Type | Parallel | |
| Roller Material | Bearing Steel | |
| Cage Material | Non-Metallic | |
| Number of Rows | 1 | |
| Dynamic Load Rating | 160kN | |
| Standards/Approvals | RoHS Compliance | |
| End Type | Open | |
| Series | NUP | |
| Limiting Speed | 13000rpm | |
| Bearing Material | Bearing Steel | |
| Outside Diameter | 100mm | |
| Alles selecteren | ||
|---|---|---|
Merk SKF | ||
Product Type Cylindrical Roller Bearing | ||
Inside Diameter 45mm | ||
Race Width 36mm | ||
Bore Type Parallel | ||
Roller Material Bearing Steel | ||
Cage Material Non-Metallic | ||
Number of Rows 1 | ||
Dynamic Load Rating 160kN | ||
Standards/Approvals RoHS Compliance | ||
End Type Open | ||
Series NUP | ||
Limiting Speed 13000rpm | ||
Bearing Material Bearing Steel | ||
Outside Diameter 100mm | ||
- Land van herkomst:
- DE
The SKF Single row cylindrical roller bearings are designed to accommodate high radial loads in combination with high speeds. Having two integral flanges on the outer ring and one integral flange and one loose flange ring on the inner ring, NUP design bearings can locate the shaft axially in both directions. An important feature is the separable design, which facilitates mounting and enables the bearing components to be interchanged.
High radial load carrying capacity
Low friction
Long service life
Locate the shaft axially in both directions
Separable design