Timken LM29749/LM29710 Taper 38.1 mm ID Roller Bearing, 65.08 mm OD
- RS-stocknr.:
- 134-7456
- Fabrikantnummer:
- LM29749/LM29710
- Fabrikant:
- Timken
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal (1 eenheid)*
€ 30,15
(excl. BTW)
€ 36,48
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 2 stuk(s) klaar voor verzending
- 5 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 30,15 |
| 5 - 9 | € 28,93 |
| 10 - 24 | € 28,35 |
| 25 + | € 27,75 |
*prijsindicatie
- RS-stocknr.:
- 134-7456
- Fabrikantnummer:
- LM29749/LM29710
- Fabrikant:
- Timken
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Timken | |
| Product Type | Roller Bearing | |
| Inside Diameter | 38.1mm | |
| Bore Type | Parallel | |
| Roller Material | Steel | |
| Cage Material | Steel | |
| Outside Diameter | 65.08mm | |
| Static Load Rating | 60.3kN | |
| End Type | Sealed | |
| Bearing Dynamic Load Rating | 48.6kN | |
| Standards/Approvals | No | |
| Cone Width | 13.97mm | |
| Bearing Type | Taper | |
| Alles selecteren | ||
|---|---|---|
Merk Timken | ||
Product Type Roller Bearing | ||
Inside Diameter 38.1mm | ||
Bore Type Parallel | ||
Roller Material Steel | ||
Cage Material Steel | ||
Outside Diameter 65.08mm | ||
Static Load Rating 60.3kN | ||
End Type Sealed | ||
Bearing Dynamic Load Rating 48.6kN | ||
Standards/Approvals No | ||
Cone Width 13.97mm | ||
Bearing Type Taper | ||
- Land van herkomst:
- PL
Tapered Roller Bearings - TS (Tapered Single) Imperial/Metric
These bearings are the most basic and most widely used type of tapered roller bearings. They consist of two main separable parts, the cone (inner ring) assembly and the cup (outer ring). They are typically mounted in opposing pairs on a shaft.
Features and Benefits
• Imperial / Metric;• One piece stamped steel cage retains rollers on the cone;• Inner diameter range 7.937 mm to 863.600 mm;• Outer diameter range 31.991 mm to 1060.000 mm;• Single cone and cup
Product Application Information
Typical applications include, vehicle front wheels, differential and pinion configurations, conveyor rolls, machine tool spindles and trailer wheels.
Timken
Gerelateerde Links
- Timken 13889/13836 Taper 38.1 mm ID Roller Bearing, 65.08 mm OD
- SNR LM29749/710 Roller 38.1 mm ID Bearing, 65.08 mm OD
- NTN 4T-LM29749/LM29710 Taper Roller Needle Roller Thrust Bearing, 65.088 mm OD
- Timken LM48548/LM48510 Taper 34.92 mm ID Roller Bearing, 65.08 mm OD
- NTN 4T-LM29748/LM29710 Taper Roller 38.1 mm ID Roller Bearing, 65 mm OD
- SKF LM 29749/711/Q Taper Roller 38.1 mm ID Tapered Roller Bearing, 65.08 mm OD
- SKF LM 29749/710/Q Taper Roller 38.1 mm ID Tapered Roller Bearing, 65.08 mm OD
- Timken HM801346/HM801310 Taper 38.1 mm ID Roller Bearing, 82.55 mm OD