INA HK1812-B 18 mm ID Roller Bearing Drawn Cup Needle, 24 mm OD
- RS-stocknr.:
- 137-1749
- Fabrikantnummer:
- HK1812-B
- Fabrikant:
- INA
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal (1 eenheid)*
€ 7,79
(excl. BTW)
€ 9,43
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 10 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 7,79 |
| 5 - 9 | € 7,49 |
| 10 - 24 | € 7,33 |
| 25 + | € 7,18 |
*prijsindicatie
- RS-stocknr.:
- 137-1749
- Fabrikantnummer:
- HK1812-B
- Fabrikant:
- INA
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | INA | |
| Product Type | Roller Bearing | |
| Inside Diameter | 18mm | |
| Race Width | 12mm | |
| Bore Type | Parallel | |
| Cage Material | Sheet Steel | |
| Static Load Rating | 10900N | |
| Dynamic Load Rating | 8100N | |
| End Type | Open | |
| Standards/Approvals | No | |
| Limiting Speed | 14000rpm | |
| Maximum Speed - Oil | 14000rpm | |
| Number of Rows | 1 | |
| Maximum Speed - Grease | 8400rpm | |
| Outside Diameter | 24mm | |
| Bearing Type | Drawn Cup Needle | |
| Alles selecteren | ||
|---|---|---|
Merk INA | ||
Product Type Roller Bearing | ||
Inside Diameter 18mm | ||
Race Width 12mm | ||
Bore Type Parallel | ||
Cage Material Sheet Steel | ||
Static Load Rating 10900N | ||
Dynamic Load Rating 8100N | ||
End Type Open | ||
Standards/Approvals No | ||
Limiting Speed 14000rpm | ||
Maximum Speed - Oil 14000rpm | ||
Number of Rows 1 | ||
Maximum Speed - Grease 8400rpm | ||
Outside Diameter 24mm | ||
Bearing Type Drawn Cup Needle | ||
Drawn Cup Needle Roller Bearings
INA from Schaeffler drawn cup needle roller bearings with open ends and closed ends are bearings with a small radial section height. They comprise thin-walled, drawn cup outer rings and needle roller and cage assemblies which together form a complete unit.;Most the bearings are of a single row design and do not have a lubrication hole. Double row designs have a lubrication hole and the suffix ZW.
Features and Benefits
• Lower operating costs;• Reduced maintenance due to improved lubrication;• Lower heat generation;• Less noise
Product Application Information
These bearings allow the design of compact and easy‑to‑fit bearing arrangements with high radial load carrying capacity.;Drawn cup needle roller bearings require a hardened and ground bearing raceway on the shaft.
Suffixes
2RS - Contact seals on both sides;RS - Contact seal on one side;ZW - Double row design, with lubrication hole
INA
Gerelateerde Links
- INA HK1816-B 18 mm ID Roller Bearing Drawn Cup Needle, 24 mm OD
- INA HK1212-B 12 mm ID Roller Bearing Drawn Cup Needle, 18 mm OD
- INA HK1816-2RS-L271 18 mm ID Roller Bearing Drawn Cup Needle, 24 mm OD
- INA HK1814-RS-L271 18 mm ID Roller Bearing Drawn Cup Needle, 24 mm OD
- INA HK1214-RS-L271 12 mm ID Roller Bearing Drawn Cup Needle, 18 mm OD
- INA HK1216-2RS-L271 12 mm ID Roller Bearing Drawn Cup Needle, 18 mm OD
- INA HK0606-B 6 mm ID Roller Bearing Drawn Cup Needle, 10 mm OD
- INA HK1712-B 17 mm ID Roller Bearing Drawn Cup Needle, 23 mm OD