INA NX30-Z-XL 30 mm ID Roller Bearing Needle, 42 mm OD
- RS-stocknr.:
- 174-1363
- Fabrikantnummer:
- NX30-Z-XL
- Fabrikant:
- INA
Subtotaal (1 eenheid)*
€ 100,88
(excl. BTW)
€ 122,06
(incl. BTW)
Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 100,88 |
*prijsindicatie
- RS-stocknr.:
- 174-1363
- Fabrikantnummer:
- NX30-Z-XL
- Fabrikant:
- INA
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | INA | |
| Product Type | Roller Bearing | |
| Inside Diameter | 30mm | |
| Race Width | 30mm | |
| Bore Type | Parallel | |
| Cage Material | Steel | |
| Dynamic Load Rating | 25.5kN | |
| Limiting Speed | 4300rpm | |
| Outside Diameter | 42mm | |
| Standards/Approvals | No | |
| End Type | Open | |
| Static Load Rating | 36kN | |
| Bearing Type | Needle | |
| Alles selecteren | ||
|---|---|---|
Merk INA | ||
Product Type Roller Bearing | ||
Inside Diameter 30mm | ||
Race Width 30mm | ||
Bore Type Parallel | ||
Cage Material Steel | ||
Dynamic Load Rating 25.5kN | ||
Limiting Speed 4300rpm | ||
Outside Diameter 42mm | ||
Standards/Approvals No | ||
End Type Open | ||
Static Load Rating 36kN | ||
Bearing Type Needle | ||
These series comprise radial needle roller bearings and a rolling bearing component capable of supporting axial loads. They can support high radial forces as well as axial forces in one direction, while NKIB can support axial forces from both directions, and are used as locating or semi-locating bearings
Needle roller/axial deep groove ball bearings
Lubrication
Needle roller/ axial cylindrical roller bearings
Lubrication
Needle roller/ angular contact ball bearings
For alternating axial forces
Lubrication
Operating temperature
Cages
Suffixes
Gerelateerde Links
- INA NX17-Z-XL Needle
- INA NX35-Z-XL Needle
- INA NX25-Z-XL Needle
- INA NKXR45-Z-XL 45 mm ID Needle Roller Bearing Axial Cylindrical Roller 58 mm OD
- INA NKXR20-Z-XL Needle 20 mm ID Roller Bearing, 30 mm OD
- INA NX15-Z-XL 15 mm ID Roller Bearing Needle, 24 mm OD
- INA NX10-Z-XL 10 mm ID Roller Bearing Needle, 19 mm OD
- INA NKXR30-Z-XL Needle 30 mm ID Roller Bearing, 42 mm OD