FAG 31305-A Taper 25 mm ID Roller Bearing, 62 mm OD
- RS-stocknr.:
- 190-8358
- Fabrikantnummer:
- 31305-A
- Fabrikant:
- FAG
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal (1 eenheid)*
€ 47,00
(excl. BTW)
€ 56,87
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 15 juli 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 47,00 |
| 5 - 9 | € 45,67 |
| 10 - 24 | € 44,40 |
| 25 + | € 43,29 |
*prijsindicatie
- RS-stocknr.:
- 190-8358
- Fabrikantnummer:
- 31305-A
- Fabrikant:
- FAG
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | FAG | |
| Product Type | Roller Bearing | |
| Inside Diameter | 25mm | |
| Bore Type | Tapered | |
| Cage Material | Steel | |
| Outside Diameter | 62mm | |
| Static Load Rating | 38.5kN | |
| Cone Width | 18.25mm | |
| End Type | Open | |
| Series | 313 | |
| Standards/Approvals | No | |
| Bearing Dynamic Load Rating | 37kN | |
| Bearing Type | Taper | |
| Alles selecteren | ||
|---|---|---|
Merk FAG | ||
Product Type Roller Bearing | ||
Inside Diameter 25mm | ||
Bore Type Tapered | ||
Cage Material Steel | ||
Outside Diameter 62mm | ||
Static Load Rating 38.5kN | ||
Cone Width 18.25mm | ||
End Type Open | ||
Series 313 | ||
Standards/Approvals No | ||
Bearing Dynamic Load Rating 37kN | ||
Bearing Type Taper | ||
High radial loads occur
High axial loads act on one side
Combined loads must be supported (radial and axial forces acting simultaneously)
Precise axial guidance of the shaft is required (locating bearing function)
The bearing arrangement must have very high axial rigidity
The bearing position is operated clearance-free or under preload (single bearings are adjusted against each other)
High running accuracy is required
The load carrying capacity of angular contact ball bearings is no longer sufficient and the higher speed suitability of angular contact ball bearings is not required
The bearings are not required to compensate misalignments
The design objective comprises compact, rigid and economical bearing arrangements with a high load carrying capacity
Gerelateerde Links
- SKF 31305 Taper 25 mm ID Roller Bearing, 62 mm OD
- RS PRO 31305 Taper 25 mm ID Roller Bearing, 62 mm OD
- FAG 32305-A Taper Roller 25 mm ID Roller Bearing, 62 mm OD
- FAG 30305-A Taper 25 mm ID Roller Bearing, 62 mm OD
- FAG 32206-XL Taper 30 mm ID Roller Bearing, 62 mm OD
- FAG 30206-A Taper 30 mm ID Roller Bearing, 62 mm OD
- FAG 32007-XDY-XL Taper 35 mm ID Tapered Roller Bearing, 62 mm OD
- FAG 33205 Taper Roller 25 mm ID Tapered Roller Bearing, 52 mm OD