FAG 33014 Taper 70 mm ID Roller Bearing, 110 mm OD
- RS-stocknr.:
- 190-8381
- Fabrikantnummer:
- 33014
- Fabrikant:
- FAG
Bulkkorting beschikbaar
Subtotaal (1 eenheid)*
€ 113,05
(excl. BTW)
€ 136,79
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 07 juli 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 113,05 |
| 5 - 9 | € 108,51 |
| 10 - 24 | € 106,25 |
| 25 + | € 103,98 |
*prijsindicatie
- RS-stocknr.:
- 190-8381
- Fabrikantnummer:
- 33014
- Fabrikant:
- FAG
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | FAG | |
| Product Type | Roller Bearing | |
| Inside Diameter | 70mm | |
| Bore Type | Tapered | |
| Cage Material | Steel | |
| Bearing Dynamic Load Rating | 136kN | |
| Standards/Approvals | No | |
| Cone Width | 31mm | |
| Static Load Rating | 223kN | |
| Outside Diameter | 110mm | |
| End Type | Open | |
| Bearing Type | Taper | |
| Alles selecteren | ||
|---|---|---|
Merk FAG | ||
Product Type Roller Bearing | ||
Inside Diameter 70mm | ||
Bore Type Tapered | ||
Cage Material Steel | ||
Bearing Dynamic Load Rating 136kN | ||
Standards/Approvals No | ||
Cone Width 31mm | ||
Static Load Rating 223kN | ||
Outside Diameter 110mm | ||
End Type Open | ||
Bearing Type Taper | ||
High radial loads occur
High axial loads act on one side
Combined loads must be supported (radial and axial forces acting simultaneously)
Precise axial guidance of the shaft is required (locating bearing function)
The bearing arrangement must have very high axial rigidity
The bearing position is operated clearance-free or under preload (single bearings are adjusted against each other)
High running accuracy is required
The load carrying capacity of angular contact ball bearings is no longer sufficient and the higher speed suitability of angular contact ball bearings is not required
The bearings are not required to compensate misalignments
The design objective comprises compact, rigid and economical bearing arrangements with a high load carrying capacity
Gerelateerde Links
- SKF 33014 Taper 70 mm ID Tapered Roller Bearing, 110 mm OD
- RS PRO 33014 Taper 70 mm ID Roller Bearing, 110 mm OD
- FAG JK0S070-A Taper Roller 70 mm ID Tapered Roller Bearing, 110 mm OD
- FAG 33122 Taper Roller 110 mm ID Roller Bearing, 180 mm OD
- FAG 33212 Taper Roller 60 mm ID Roller Bearing, 110 mm OD
- FAG 33022 Taper Roller 110 mm ID Roller Bearing, 170 mm OD
- FAG 33114 Taper Roller 70 mm ID Roller Bearing, 120 mm OD
- FAG 33113 Taper Roller 65 mm ID Tapered Roller Bearing, 110 mm OD