Better World
INA SL183007-A-XL 35 mm ID Roller Bearing, 62 mm OD
- RS-stocknr.:
- 191-4486
- Fabrikantnummer:
- SL183007-A-XL
- Fabrikant:
- INA
Bulkkorting beschikbaar
Subtotaal (1 eenheid)*
€ 114,55
(excl. BTW)
€ 138,61
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 08 juni 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 114,55 |
| 5 - 9 | € 109,97 |
| 10 - 24 | € 107,70 |
| 25 + | € 105,38 |
*prijsindicatie
Better World
Ons Better World assortiment bevat producten die het u gemakkelijk maken om een groenere productkeuze te maken waarop u kunt vertrouwen. Klik hier voor meer informatie.
- RS-stocknr.:
- 191-4486
- Fabrikantnummer:
- SL183007-A-XL
- Fabrikant:
- INA
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | INA | |
| Product Type | Roller Bearing | |
| Inside Diameter | 35mm | |
| Race Width | 20mm | |
| Bore Type | Parallel | |
| Dynamic Load Rating | 55kN | |
| Outside Diameter | 62mm | |
| Static Load Rating | 53kN | |
| Better World Product | Yes | |
| End Type | Open | |
| Better World Claim | Extended Product Life, Saves Energy | |
| Standards/Approvals | No | |
| Alles selecteren | ||
|---|---|---|
Merk INA | ||
Product Type Roller Bearing | ||
Inside Diameter 35mm | ||
Race Width 20mm | ||
Bore Type Parallel | ||
Dynamic Load Rating 55kN | ||
Outside Diameter 62mm | ||
Static Load Rating 53kN | ||
Better World Product Yes | ||
End Type Open | ||
Better World Claim Extended Product Life, Saves Energy | ||
Standards/Approvals No | ||
Bearing arrangements are subjected to particularly high radial loads
Not only very high radial forces but also high axial loads from one direction must be supported by the bearing position (semi‑locating bearing function)
Bearing arrangements operating under the conditions described above must have very high rigidity
Axial displacements of the shaft relative to the housing must be compensated without constraint in the bearing
Very high radial loads occur at lower speeds, i.e. the bearings do not need to achieve speeds as high as those of cylindrical roller bearings with cage and particularly space-saving designs are required despite very high load
The bearings should be separable (not self-retaining) for easier mounting
Gerelateerde Links
- INA NKI45/35-TV-XL 45 mm ID Roller Bearing Needle, 62 mm OD
- INA NK50/35-TV-XL 50 mm ID Roller Bearing Needle, 62 mm OD
- INA PNA40/62-XL 40 mm ID Roller Bearing Aligning Needle Roller, 62 mm OD
- INA NA4908-XL 40 mm ID Roller Bearing Needle, 62 mm OD
- INA SL182206-A-XL 30 mm ID Roller Bearing, 62 mm OD
- INA SL185007-A 35 mm ID Roller Bearing, 62 mm OD
- INA 81207-TV 35 mm ID Roller Bearing, 62 mm OD
- INA SL045007-PP 35 mm ID Roller Bearing, 62 mm OD