RS Better World
INA SL183011-A-XL 55 mm ID Roller Bearing, 90 mm OD
- RS-stocknr.:
- 191-4490
- Fabrikantnummer:
- SL183011-A-XL
- Fabrikant:
- INA
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal (1 eenheid)*
€ 191,20
(excl. BTW)
€ 231,35
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 23 juli 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 191,20 |
| 5 - 9 | € 183,58 |
| 10 - 24 | € 179,73 |
| 25 + | € 175,90 |
*prijsindicatie
Ons Better World assortiment bevat producten die het u gemakkelijk maken om een groenere productkeuze te maken waarop u kunt vertrouwen.
Klik hier voor meer informatie.
- RS-stocknr.:
- 191-4490
- Fabrikantnummer:
- SL183011-A-XL
- Fabrikant:
- INA
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | INA | |
| Product Type | Roller Bearing | |
| Inside Diameter | 55mm | |
| Race Width | 26mm | |
| Bore Type | Parallel | |
| Dynamic Load Rating | 120kN | |
| Static Load Rating | 136kN | |
| End Type | Open | |
| Standards/Approvals | No | |
| Outside Diameter | 90mm | |
| Better World Product | Yes | |
| Better World Claim | Extended Product Life, Saves Energy | |
| Alles selecteren | ||
|---|---|---|
Merk INA | ||
Product Type Roller Bearing | ||
Inside Diameter 55mm | ||
Race Width 26mm | ||
Bore Type Parallel | ||
Dynamic Load Rating 120kN | ||
Static Load Rating 136kN | ||
End Type Open | ||
Standards/Approvals No | ||
Outside Diameter 90mm | ||
Better World Product Yes | ||
Better World Claim Extended Product Life, Saves Energy | ||
Bearing arrangements are subjected to particularly high radial loads
Not only very high radial forces but also high axial loads from one direction must be supported by the bearing position (semi‑locating bearing function)
Bearing arrangements operating under the conditions described above must have very high rigidity
Axial displacements of the shaft relative to the housing must be compensated without constraint in the bearing
Very high radial loads occur at lower speeds, i.e. the bearings do not need to achieve speeds as high as those of cylindrical roller bearings with cage and particularly space-saving designs are required despite very high load
The bearings should be separable (not self-retaining) for easier mounting
Gerelateerde Links
- INA RPNA40/55-XL 40 mm ID Roller Bearing Needle, 55 mm OD
- INA NK90/25-XL 90 mm ID Roller Bearing Needle, 90 mm OD
- INA NK90/35-XL 90 mm ID Roller Bearing Needle, 90 mm OD
- INA NK73/35-XL 90 mm ID Roller Bearing Needle, 90 mm OD
- INA NK73/25-XL 90 mm ID Roller Bearing Needle, 90 mm OD
- INA RNA4916-XL 90 mm ID Roller Bearing Radial Roller, 110 mm OD
- INA RNA4913-XL 72 mm ID Roller Bearing, 90 mm OD
- INA NA4907-XL 35 mm ID Roller Bearing Needle, 55 mm OD