INA SL192308 40 mm ID Roller Bearing, 90 mm OD
- RS-stocknr.:
- 191-4509
- Fabrikantnummer:
- SL192308
- Fabrikant:
- INA
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal (1 eenheid)*
€ 258,68
(excl. BTW)
€ 313,00
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 08 oktober 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 258,68 |
| 5 - 9 | € 248,35 |
| 10 + | € 243,17 |
*prijsindicatie
- RS-stocknr.:
- 191-4509
- Fabrikantnummer:
- SL192308
- Fabrikant:
- INA
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | INA | |
| Product Type | Roller Bearing | |
| Inside Diameter | 40mm | |
| Race Width | 33mm | |
| Bore Type | Parallel | |
| Static Load Rating | 153kN | |
| Dynamic Load Rating | 170kN | |
| Standards/Approvals | No | |
| End Type | Open | |
| Outside Diameter | 90mm | |
| Alles selecteren | ||
|---|---|---|
Merk INA | ||
Product Type Roller Bearing | ||
Inside Diameter 40mm | ||
Race Width 33mm | ||
Bore Type Parallel | ||
Static Load Rating 153kN | ||
Dynamic Load Rating 170kN | ||
Standards/Approvals No | ||
End Type Open | ||
Outside Diameter 90mm | ||
Bearing arrangements are subjected to particularly high radial loads
Not only very high radial forces but also high axial loads from one direction must be supported by the bearing position (semi‑locating bearing function)
Bearing arrangements operating under the conditions described above must have very high rigidity
Axial displacements of the shaft relative to the housing must be compensated without constraint in the bearing
Very high radial loads occur at lower speeds, i.e. the bearings do not need to achieve speeds as high as those of cylindrical roller bearings with cage
Particularly space-saving designs are required despite very high load
The bearings should be separable (not self-retaining) for easier mounting
Gerelateerde Links
- INA 87408-L 40 mm ID Roller Bearing, 90 mm OD
- INA NJ308-E-XL-TVP2 40 mm ID Roller Bearing, 90 mm OD
- INA NK90/35-XL 90 mm ID Roller Bearing Needle, 90 mm OD
- INA NK73/35-XL 90 mm ID Roller Bearing Needle, 90 mm OD
- INA NK90/25-XL 90 mm ID Roller Bearing Needle, 90 mm OD
- INA NK73/25-XL 90 mm ID Roller Bearing Needle, 90 mm OD
- INA RNA4916-XL 90 mm ID Roller Bearing Radial Roller, 110 mm OD
- INA SX011814-A 70 mm ID Roller Bearing, 90 mm OD