Timken 30206 Taper 30 mm ID Metric Roller Bearing, 62 mm OD
- RS-stocknr.:
- 193-0991
- Fabrikantnummer:
- 30206
- Fabrikant:
- Timken
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal (1 eenheid)*
€ 19,29
(excl. BTW)
€ 23,34
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- Plus verzending 14 stuk(s) vanaf 15 juni 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 19,29 |
| 5 - 9 | € 18,15 |
| 10 - 24 | € 17,78 |
| 25 + | € 17,41 |
*prijsindicatie
- RS-stocknr.:
- 193-0991
- Fabrikantnummer:
- 30206
- Fabrikant:
- Timken
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Timken | |
| Product Type | Metric Roller Bearing | |
| Inside Diameter | 30mm | |
| Bore Type | Tapered | |
| Roller Material | Steel | |
| Standards/Approvals | No | |
| Cup Width | 14mm | |
| Bearing Material | Steel | |
| End Type | Open | |
| Number of Rows | 1 | |
| Cone Width | 17.25mm | |
| Bearing Dynamic Load Rating | 49.3kN | |
| Outside Diameter | 62mm | |
| Bearing Type | Taper | |
| Alles selecteren | ||
|---|---|---|
Merk Timken | ||
Product Type Metric Roller Bearing | ||
Inside Diameter 30mm | ||
Bore Type Tapered | ||
Roller Material Steel | ||
Standards/Approvals No | ||
Cup Width 14mm | ||
Bearing Material Steel | ||
End Type Open | ||
Number of Rows 1 | ||
Cone Width 17.25mm | ||
Bearing Dynamic Load Rating 49.3kN | ||
Outside Diameter 62mm | ||
Bearing Type Taper | ||
- Land van herkomst:
- PL
Timken tapered roller bearing components are precisely designed to manage both axial and radial loads.
Metric tapered roller bearing matched assemblies consist of two single-row bearings (type TS) with individually matched spacers that are set at the factory to pre-determined dimensions and tolerances.
The standard outer ring spacer is designed with lubricationholes to allow for lubricant flow into both bearing rows.
Matched bearing assemblies are supplied ready-to-fit into customer applications, with a unique serial number marked on spacers and bearing components for easy identification.
• Pre-set clearance simplifies mounting
• Higher productivity and greater uptime through precise setting
• High axial and radial load carrying capacity
• Axial loads accommodated in both directions
Gerelateerde Links
- RS PRO 30206 Taper 30 mm ID Metric Roller Bearing, 62 mm OD
- Timken 32206 Taper 30 mm ID Metric Roller Bearing, 62 mm OD
- Timken 33206 Taper 30 mm ID Metric Roller Bearing, 62 mm OD
- SKF 30206 Taper Roller 30 mm ID Tapered Roller Bearing, 62 mm OD
- FAG 30206-A Taper 30 mm ID Roller Bearing, 62 mm OD
- NTN 4T-30206 Taper Roller 30 mm ID Needle Roller Thrust Bearing, 62 mm OD
- Timken 30305 Taper 25 mm ID Metric Roller Bearing, 62 mm OD
- Timken 32007X Taper 35 mm ID Metric Roller Bearing, 62 mm OD