Timken 30208 Taper 40 mm ID Metric Roller Bearing, 80 mm OD
- RS-stocknr.:
- 193-0993
- Fabrikantnummer:
- 30208
- Fabrikant:
- Timken
Bulkkorting beschikbaar
Subtotaal (1 eenheid)*
€ 33,12
(excl. BTW)
€ 40,08
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 75,00
Op voorraad
- 9 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 33,12 |
| 5 - 9 | € 31,18 |
| 10 - 24 | € 30,51 |
| 25 + | € 29,87 |
*prijsindicatie
- RS-stocknr.:
- 193-0993
- Fabrikantnummer:
- 30208
- Fabrikant:
- Timken
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Timken | |
| Product Type | Metric Roller Bearing | |
| Inside Diameter | 40 mm | |
| Bore Type | Tapered | |
| Roller Material | Steel | |
| Cone Width | 19.75mm | |
| Static Load Rating | 74.7kN | |
| Outside Diameter | 80 mm | |
| Bearing Material | Steel | |
| Number of Rows | 1 | |
| Standards/Approvals | No | |
| Bearing Dynamic Load Rating | 70.9 kN | |
| End Type | Open | |
| Cup Width | 16mm | |
| Bearing Type | Taper | |
| Alles selecteren | ||
|---|---|---|
Merk Timken | ||
Product Type Metric Roller Bearing | ||
Inside Diameter 40 mm | ||
Bore Type Tapered | ||
Roller Material Steel | ||
Cone Width 19.75mm | ||
Static Load Rating 74.7kN | ||
Outside Diameter 80 mm | ||
Bearing Material Steel | ||
Number of Rows 1 | ||
Standards/Approvals No | ||
Bearing Dynamic Load Rating 70.9 kN | ||
End Type Open | ||
Cup Width 16mm | ||
Bearing Type Taper | ||
- Land van herkomst:
- PL
Timken tapered roller bearing components are precisely designed to manage both axial and radial loads.
Metric tapered roller bearing matched assemblies consist of two single-row bearings (type TS) with individually matched spacers that are set at the factory to pre-determined dimensions and tolerances.
The standard outer ring spacer is designed with lubricationholes to allow for lubricant flow into both bearing rows.
Matched bearing assemblies are supplied ready-to-fit into customer applications, with a unique serial number marked on spacers and bearing components for easy identification.
• Pre-set clearance simplifies mounting
• Higher productivity and greater uptime through precise setting
• High axial and radial load carrying capacity
• Axial loads accommodated in both directions
Gerelateerde Links
- RS PRO 30208 Taper 40 mm ID Metric Roller Bearing, 80 mm OD
- NTN 4T-30208 Taper Roller 40 mm ID Taper Roller Bearing, 80 mm OD
- Timken 32208 Taper 40 mm ID Metric Roller Bearing, 80 mm OD
- SKF 30208 Taper 40 mm ID Roller Bearing, 80 mm OD
- FAG 30208-XL Taper 40 mm ID Roller Bearing, 80 mm OD
- Timken 32216 Taper 80 mm ID Metric Roller Bearing, 140 mm OD
- Timken 30307 Taper 35 mm ID Metric Roller Bearing, 80 mm OD
- Timken 32010X Taper 50 mm ID Metric Roller Bearing, 80 mm OD