Timken 33205 Taper 25 mm ID Metric Roller Bearing, 52 mm OD
- RS-stocknr.:
- 193-1036
- Fabrikantnummer:
- 33205
- Fabrikant:
- Timken
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal (1 eenheid)*
€ 34,13
(excl. BTW)
€ 41,30
(incl. BTW)
Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 34,13 |
| 5 - 9 | € 32,14 |
| 10 - 24 | € 31,49 |
| 25 + | € 30,81 |
*prijsindicatie
- RS-stocknr.:
- 193-1036
- Fabrikantnummer:
- 33205
- Fabrikant:
- Timken
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Timken | |
| Product Type | Metric Roller Bearing | |
| Inside Diameter | 25mm | |
| Bore Type | Tapered | |
| Bearing Dynamic Load Rating | 65.4kN | |
| Outside Diameter | 52mm | |
| End Type | Shielded | |
| Standards/Approvals | No | |
| Limiting Speed | 13000rpm | |
| Cone Width | 22mm | |
| Number of Rows | 1 | |
| Cup Width | 18mm | |
| Static Load Rating | 63.6kN | |
| Bearing Type | Taper | |
| Alles selecteren | ||
|---|---|---|
Merk Timken | ||
Product Type Metric Roller Bearing | ||
Inside Diameter 25mm | ||
Bore Type Tapered | ||
Bearing Dynamic Load Rating 65.4kN | ||
Outside Diameter 52mm | ||
End Type Shielded | ||
Standards/Approvals No | ||
Limiting Speed 13000rpm | ||
Cone Width 22mm | ||
Number of Rows 1 | ||
Cup Width 18mm | ||
Static Load Rating 63.6kN | ||
Bearing Type Taper | ||
- Land van herkomst:
- FR
Timken tapered roller bearing components are precisely designed to manage both axial and radial loads.
Metric tapered roller bearing matched assemblies consist of two single-row bearings (type TS) with individually matched spacers that are set at the factory to pre-determined dimensions and tolerances.
The standard outer ring spacer is designed with lubricationholes to allow for lubricant flow into both bearing rows.
Matched bearing assemblies are supplied ready-to-fit into customer applications, with a unique serial number marked on spacers and bearing components for easy identification.
• Pre-set clearance simplifies mounting
• Higher productivity and greater uptime through precise setting
• High axial and radial load carrying capacity
• Axial loads accommodated in both directions
Gerelateerde Links
- Timken 32205 Taper 25 mm ID Metric Roller Bearing, 52 mm OD
- Timken 30205 Taper 25 mm ID Metric Roller Bearing, 52 mm OD
- SKF 33205 Taper 25 mm ID Roller Bearing, 52 mm OD
- FAG 33205 Taper Roller 25 mm ID Tapered Roller Bearing, 52 mm OD
- RS PRO 33205 Taper 25 mm ID Roller Bearing, 52 mm OD
- NTN 4T-33205 Taper Roller 25 mm ID Needle Roller Thrust Bearing, 52 mm OD
- Timken 30304 Taper 20 mm ID Metric Roller Bearing, 52 mm OD
- Timken 30305 Taper 25 mm ID Metric Roller Bearing, 62 mm OD