INA NK105/26-XL 125 mm ID Roller Bearing Needle, 125 mm OD
- RS-stocknr.:
- 194-7344
- Fabrikantnummer:
- NK105/26-XL
- Fabrikant:
- INA
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal (1 eenheid)*
€ 242,39
(excl. BTW)
€ 293,29
(incl. BTW)
Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 242,39 |
| 5 - 9 | € 232,70 |
| 10 + | € 227,84 |
*prijsindicatie
- RS-stocknr.:
- 194-7344
- Fabrikantnummer:
- NK105/26-XL
- Fabrikant:
- INA
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | INA | |
| Product Type | Roller Bearing | |
| Inside Diameter | 125mm | |
| Race Width | 26mm | |
| Bore Type | Parallel | |
| Static Load Rating | 155kN | |
| End Type | Open | |
| Standards/Approvals | No | |
| Outside Diameter | 125mm | |
| Dynamic Load Rating | 89kN | |
| Bearing Type | Needle | |
| Alles selecteren | ||
|---|---|---|
Merk INA | ||
Product Type Roller Bearing | ||
Inside Diameter 125mm | ||
Race Width 26mm | ||
Bore Type Parallel | ||
Static Load Rating 155kN | ||
End Type Open | ||
Standards/Approvals No | ||
Outside Diameter 125mm | ||
Dynamic Load Rating 89kN | ||
Bearing Type Needle | ||
The Bearings can support high to very high radial forces
Are used when the load carrying capacity or accuracy of drawn cup needle roller bearings with open ends is no longer sufficient and the high load capacity of cylindrical roller bearings is not yet required
Can only support radial loads and, as a result, are highly suitable for use as non-locating bearings (they permit axial displacement of the shaft relative to the housing in the bearing)
Permit high speeds in spite of line contact
Compensate misalignments between the shaft and housing (aligning needle roller bearings)
Require only a very small radial design envelope, particularly if the bearing arrangement is designed without an inner ring
Are available in numerous sizes and designs
Result in particularly compact, cost-effective and economical bearing arrangements
Gerelateerde Links
- INA NK18/20-XL 26 mm ID Roller Bearing Needle, 26 mm OD
- NTN NK105/26R 105 mm ID Roller Bearing Needle Roller 125 mm OD
- NTN NK105/36R 105 mm ID Roller Bearing Machined-ring 125 mm OD
- INA NK95/26-XL 95 mm ID Roller Bearing Needle, 95 mm OD
- INA NX17-Z-XL 17 mm ID Roller Bearing Needle, 26 mm OD
- INA NKX17-Z-XL 17 mm ID Roller Bearing Needle, 26 mm OD
- INA NK100/26-XL 120 mm ID Roller Bearing Needle, 120 mm OD
- INA NK26/16-XL 26 mm ID Roller Bearing Needle, 34 mm OD