INA NK42/20-XL 52 mm ID Roller Bearing Needle, 52 mm OD
- RS-stocknr.:
- 194-7355
- Fabrikantnummer:
- NK42/20-XL
- Fabrikant:
- INA
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal (1 eenheid)*
€ 39,35
(excl. BTW)
€ 47,61
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 17 juli 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 39,35 |
| 5 - 9 | € 37,80 |
| 10 - 24 | € 36,99 |
| 25 + | € 36,22 |
*prijsindicatie
- RS-stocknr.:
- 194-7355
- Fabrikantnummer:
- NK42/20-XL
- Fabrikant:
- INA
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | INA | |
| Product Type | Roller Bearing | |
| Inside Diameter | 52mm | |
| Race Width | 20mm | |
| Bore Type | Parallel | |
| Outside Diameter | 52mm | |
| Standards/Approvals | No | |
| Dynamic Load Rating | 30kN | |
| End Type | Open | |
| Static Load Rating | 49kN | |
| Bearing Type | Needle | |
| Alles selecteren | ||
|---|---|---|
Merk INA | ||
Product Type Roller Bearing | ||
Inside Diameter 52mm | ||
Race Width 20mm | ||
Bore Type Parallel | ||
Outside Diameter 52mm | ||
Standards/Approvals No | ||
Dynamic Load Rating 30kN | ||
End Type Open | ||
Static Load Rating 49kN | ||
Bearing Type Needle | ||
The Bearings can support high to very high radial forces
Are used when the load carrying capacity or accuracy of drawn cup needle roller bearings with open ends is no longer sufficient and the high load capacity of cylindrical roller bearings is not yet required
Can only support radial loads and, as a result, are highly suitable for use as non-locating bearings (they permit axial displacement of the shaft relative to the housing in the bearing)
Permit high speeds in spite of line contact
Compensate misalignments between the shaft and housing (aligning needle roller bearings)
Require only a very small radial design envelope, particularly if the bearing arrangement is designed without an inner ring
Are available in numerous sizes and designs
Result in particularly compact, cost-effective and economical bearing arrangements
Gerelateerde Links
- INA NK42/30-XL 42 mm ID Roller Bearing Needle, 52 mm OD
- INA RPNA35/52-XL 35 mm ID Roller Bearing Needle, 52 mm OD
- INA PNA30/52-XL 30 mm ID Roller Bearing Needle, 52 mm OD
- INA NKXR40-XL 40 mm ID Needle Roller Bearing Axial Cylindrical Roller 52 mm OD
- NTN NK42/20R 42 mm ID Roller Bearing Machined-ring 52 mm OD
- NTN NK42/30R 42 mm ID Roller Bearing Needle Roller 52 mm OD
- INA NKX40-Z-XL 40 mm ID Roller Bearing Needle, 52 mm OD
- INA RNA6909-ZW-XL 52 mm ID Roller Bearing Needle, 68 mm OD