INA NK80/25-XL 95 mm ID Roller Bearing Needle, 95 mm OD
- RS-stocknr.:
- 194-7368
- Fabrikantnummer:
- NK80/25-XL
- Fabrikant:
- INA
Bulkkorting beschikbaar
Subtotaal (1 eenheid)*
€ 115,14
(excl. BTW)
€ 139,32
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- Plus verzending 7 stuk(s) vanaf 27 april 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 115,14 |
| 5 - 9 | € 110,53 |
| 10 - 24 | € 108,22 |
| 25 + | € 105,91 |
*prijsindicatie
- RS-stocknr.:
- 194-7368
- Fabrikantnummer:
- NK80/25-XL
- Fabrikant:
- INA
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | INA | |
| Product Type | Roller Bearing | |
| Inside Diameter | 95mm | |
| Race Width | 25mm | |
| Bore Type | Parallel | |
| End Type | Open | |
| Static Load Rating | 119kN | |
| Standards/Approvals | No | |
| Dynamic Load Rating | 63kN | |
| Outside Diameter | 95mm | |
| Bearing Type | Needle | |
| Alles selecteren | ||
|---|---|---|
Merk INA | ||
Product Type Roller Bearing | ||
Inside Diameter 95mm | ||
Race Width 25mm | ||
Bore Type Parallel | ||
End Type Open | ||
Static Load Rating 119kN | ||
Standards/Approvals No | ||
Dynamic Load Rating 63kN | ||
Outside Diameter 95mm | ||
Bearing Type Needle | ||
The Bearings can support high to very high radial forces
Are used when the load carrying capacity or accuracy of drawn cup needle roller bearings with open ends is no longer sufficient and the high load capacity of cylindrical roller bearings is not yet required
Can only support radial loads and, as a result, are highly suitable for use as non-locating bearings (they permit axial displacement of the shaft relative to the housing in the bearing)
Permit high speeds in spite of line contact
Compensate misalignments between the shaft and housing (aligning needle roller bearings)
Require only a very small radial design envelope, particularly if the bearing arrangement is designed without an inner ring
Are available in numerous sizes and designs
Result in particularly compact, cost-effective and economical bearing arrangements
Gerelateerde Links
- INA NK80/35-XL 95 mm ID Roller Bearing Needle, 95 mm OD
- NTN NK80/25R+1R70X80X25 70 mm ID Needle Roller Bearing Needle Roller, 95 mm OD
- INA NK95/36-XL 95 mm ID Roller Bearing Needle, 95 mm OD
- INA NK95/26-XL 95 mm ID Roller Bearing Needle, 95 mm OD
- NTN NK80/35R 80 mm ID Needle Roller Bearing Machined-ring 95 mm OD
- NTN NK80/25R 80 mm ID Needle Roller Bearing Machined-ring 95 mm OD
- NTN NK80/35R+1R70X80X35 70 mm ID Needle Roller Bearing Needle Roller 95 mm OD
- INA NA4905-XL 25 mm ID Roller Bearing Needle, 42 mm OD