SKF 30215 Taper 75 mm ID Roller Bearing, 130 mm OD
- RS-stocknr.:
- 207-9984
- Fabrikantnummer:
- 30215
- Fabrikant:
- SKF
Subtotaal (1 eenheid)*
€ 85,41
(excl. BTW)
€ 103,35
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 75,00
Op voorraad
- Plus verzending 1 stuk(s) vanaf 02 maart 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 85,41 |
*prijsindicatie
- RS-stocknr.:
- 207-9984
- Fabrikantnummer:
- 30215
- Fabrikant:
- SKF
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 75 mm | |
| Bore Type | Parallel | |
| Cage Material | Pressed Steel | |
| End Type | Shielded | |
| Bearing Dynamic Load Rating | 150 KN | |
| Standards/Approvals | No | |
| Static Load Rating | 189kN | |
| Cup Width | 22mm | |
| Number of Rows | 1 | |
| Cone Width | 27.25mm | |
| Bearing Material | Steel | |
| Outside Diameter | 130 mm | |
| Limiting Speed | 5000rpm | |
| Race Type | Tapered | |
| Bearing Type | Taper | |
| Alles selecteren | ||
|---|---|---|
Merk SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 75 mm | ||
Bore Type Parallel | ||
Cage Material Pressed Steel | ||
End Type Shielded | ||
Bearing Dynamic Load Rating 150 KN | ||
Standards/Approvals No | ||
Static Load Rating 189kN | ||
Cup Width 22mm | ||
Number of Rows 1 | ||
Cone Width 27.25mm | ||
Bearing Material Steel | ||
Outside Diameter 130 mm | ||
Limiting Speed 5000rpm | ||
Race Type Tapered | ||
Bearing Type Taper | ||
- Land van herkomst:
- DE
The SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e the larger the value of e, the larger the contact angle.
Low friction
Enhanced operational reliability
Rigid bearing application
A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved.
Running-in period with reduced temperature peaks
Separable and interchangeable
The inner ring with roller and cage assembly (cone) can be mounted separately from the outer ring (cup). Furthermore, the separable components (fig. 6) are interchangeable. This facilitates mounting, dismounting and also maintenance inspection routines.
Gerelateerde Links
- NTN 4T-30215 Taper Roller 75 mm ID Taper Roller Bearing, 130 mm OD
- RS PRO 30215 Taper 75 mm ID Roller Bearing, 130 mm OD
- FAG 30215-A Taper 75 mm ID Tapered Roller Bearing, 130 mm OD
- SKF 33215 Taper Roller 75 mm ID Taper Roller Bearing, 130 mm OD
- SKF 32215 Taper 75 mm ID Roller Bearing, 130 mm OD
- NTN 32215U Taper Roller 75 mm ID Taper Roller Bearing, 130 mm OD
- SNR 30215A Taper Roller 75 mm ID Roller Bearing, 130 mm OD
- FAG 32215-A Taper Roller 75 mm ID Roller Bearing, 130 mm OD