SKF 30318 Taper 90 mm ID Roller Bearing, 190 mm OD
- RS-stocknr.:
- 208-0002
- Fabrikantnummer:
- 30318
- Fabrikant:
- SKF
Subtotaal (1 eenheid)*
€ 448,73
(excl. BTW)
€ 542,96
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 21 mei 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 448,73 |
*prijsindicatie
- RS-stocknr.:
- 208-0002
- Fabrikantnummer:
- 30318
- Fabrikant:
- SKF
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 90mm | |
| Bore Type | Parallel | |
| End Type | Shielded | |
| Bearing Dynamic Load Rating | 353kN | |
| Outside Diameter | 190mm | |
| Static Load Rating | 400kN | |
| Cup Width | 36mm | |
| Number of Rows | 1 | |
| Cone Width | 46.5mm | |
| Standards/Approvals | No | |
| Limiting Speed | 3600rpm | |
| Bearing Type | Taper | |
| Alles selecteren | ||
|---|---|---|
Merk SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 90mm | ||
Bore Type Parallel | ||
End Type Shielded | ||
Bearing Dynamic Load Rating 353kN | ||
Outside Diameter 190mm | ||
Static Load Rating 400kN | ||
Cup Width 36mm | ||
Number of Rows 1 | ||
Cone Width 46.5mm | ||
Standards/Approvals No | ||
Limiting Speed 3600rpm | ||
Bearing Type Taper | ||
- Land van herkomst:
- DE
The SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e the larger the value of e, the larger the contact angle.
Low friction
Enhanced operational reliability
Rigid bearing application
A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved.
Running-in period with reduced temperature peaks
Separable and interchangeable
The inner ring with roller and cage assembly (cone) can be mounted separately from the outer ring (cup). Furthermore, the separable components (fig. 6) are interchangeable. This facilitates mounting, dismounting and also maintenance inspection routines.
Gerelateerde Links
- FAG 30318-A Taper Roller 90 mm ID Roller Bearing, 190 mm OD
- SKF 31318 Taper 90 mm ID Roller Bearing, 190 mm OD
- SKF 32318 Taper 90 mm ID Roller Bearing, 190 mm OD
- SKF 22318 EJA/VA405 Taper 90 mm ID Roller Bearing, 190 mm OD
- NTN 30318DU Taper Roller 90 mm ID Taper Roller Bearing, 190 mm OD
- NTN 30318U Taper Roller 90 mm ID Taper Roller Bearing, 190 mm OD
- NTN 32318U Taper Roller 90 mm ID Taper Roller Bearing, 190 mm OD
- SKF 32038 X Taper Roller 190 mm ID Taper Roller Bearing, 290 mm OD