SKF 31310/CL7C Taper 50 mm ID Roller Bearing, 110 mm OD
- RS-stocknr.:
- 208-0007
- Fabrikantnummer:
- 31310/CL7C
- Fabrikant:
- SKF
Subtotaal (1 eenheid)*
€ 120,05
(excl. BTW)
€ 145,26
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- Plus verzending 1 stuk(s) vanaf 24 augustus 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 120,05 |
*prijsindicatie
- RS-stocknr.:
- 208-0007
- Fabrikantnummer:
- 31310/CL7C
- Fabrikant:
- SKF
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 50mm | |
| Bore Type | Parallel | |
| End Type | Shielded | |
| Outside Diameter | 110mm | |
| Standards/Approvals | No | |
| Series | 7FB | |
| Bearing Dynamic Load Rating | 131kN | |
| Static Load Rating | 120kN | |
| Cup Width | 19mm | |
| Number of Rows | 1 | |
| Cone Width | 29.25mm | |
| Limiting Speed | 6000rpm | |
| Bearing Type | Taper | |
| Alles selecteren | ||
|---|---|---|
Merk SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 50mm | ||
Bore Type Parallel | ||
End Type Shielded | ||
Outside Diameter 110mm | ||
Standards/Approvals No | ||
Series 7FB | ||
Bearing Dynamic Load Rating 131kN | ||
Static Load Rating 120kN | ||
Cup Width 19mm | ||
Number of Rows 1 | ||
Cone Width 29.25mm | ||
Limiting Speed 6000rpm | ||
Bearing Type Taper | ||
- Land van herkomst:
- DE
The SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e the larger the value of e, the larger the contact angle.
Low friction
Enhanced operational reliability
Rigid bearing application
A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved.
Running-in period with reduced temperature peaks
Separable and interchangeable
The inner ring with roller and cage assembly (cone) can be mounted separately from the outer ring (cup). Furthermore, the separable components (fig. 6) are interchangeable. This facilitates mounting, dismounting and also maintenance inspection routines.
Gerelateerde Links
- FAG 31310-A Taper 50 mm ID Roller Bearing, 110 mm OD
- SKF HM 803146/2/110/2/CL7C Taper 41.28 mm ID Imperial Roller Bearing, 88.9 mm OD
- SKF HM 803149/2/110/2/CL7C Taper 44.45 mm ID Imperial Roller Bearing, 88.9 mm OD
- SKF T7FC 065/CL7C Taper Roller 65 mm ID Roller Bearing, 130 mm OD
- SKF T7FC 055/CL7C Taper Roller 55 mm ID Roller Bearing, 115 mm OD
- SKF 32012 X/CL7C Taper 60 mm ID Roller Bearing, 95 mm OD
- SKF 32310 Taper 50 mm ID Roller Bearing, 110 mm OD
- SKF 32212 Taper 60 mm ID Roller Bearing, 110 mm OD