SKF 32018 X Taper 90 mm ID Roller Bearing, 140 mm OD

RS-stocknr.:: 208-0027
Fabrikantnummer:: 32018 X
Fabrikant:: SKF

SKF 32018 X Taper 90 mm ID Roller Bearing, 140 mm OD

Bekijk alle Roller Bearings

Subtotaal (1 eenheid)*

€ 112,13

(excl. BTW)

€ 135,68

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

2 stuk(s) klaar voor verzending vanaf een andere locatie

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 112,13

*prijsindicatie

RS-stocknr.:: 208-0027
Fabrikantnummer:: 32018 X
Fabrikant:: SKF

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	SKF
	Product Type	Roller Bearing
	Inside Diameter	90mm
	Bore Type	Cylindrical
	Cage Material	Sheet Metal
	Cup Width	24mm
	Static Load Rating	270kN
	Cone Width	32mm
	Outside Diameter	140mm
	End Type	Shielded
	Bearing Dynamic Load Rating	208kN
	Standards/Approvals	No
	Limiting Speed	4300rpm
	Number of Rows	1
	Bearing Type	Taper

	Alles selecteren
	Merk SKF
	Product Type Roller Bearing
	Inside Diameter 90mm
	Bore Type Cylindrical
	Cage Material Sheet Metal
	Cup Width 24mm
	Static Load Rating 270kN
	Cone Width 32mm
	Outside Diameter 140mm
	End Type Shielded
	Bearing Dynamic Load Rating 208kN
	Standards/Approvals No
	Limiting Speed 4300rpm
	Number of Rows 1
	Bearing Type Taper

Datasheet - 32018 X

Land van herkomst:: DE

SKF Roller Bearing, 90mm Inside Diameter, 140mm Outside Diameter - 32018 X

This roller bearing is designed to support rotational assemblies where axial and radial load coordination is required. It operates as a single-row tapered bearing with protective end shields, suited for installations needing controlled contamination resistance and dependable bearing alignment under combined loads.

Features and Benefits:

• Limiting speed 4300 r/min enables higher-speed operation
• Static load capacity 270 kN resists heavy standstill loads
• Dynamic load rating 208 kN sustains sustained operational forces
• Sheet-metal cage provides structural retention and spacing
• Shielded end type reduces ingress of debris and contaminants
• Cylindrical bore simplifies mounting on standard shafts

Applications

• Suitable for transmissions requiring tapered contact support
• Ideal for heavy stationary supports with high preload requirements
• Used with rotating assemblies where shaft fitting is cylindrical
• Can be used for machinery needing Compact cup-and-cone arrangement
• Suitable for drives operating at elevated rotational speeds

What are the axial and radial load capabilities at rest?

The bearing’s static load rating of 270 kN indicates its resistance to high loads when stationary.

How does the bearing manage continuous operational loads?

A dynamic load rating of 208 kN defines the bearing’s capacity to carry cyclic and running forces during service.

What shaft Interface is required for installation?

The component uses a cylindrical bore, so a straight shaft journal is required for correct fitting.

How do the end shields affect maintenance intervals?

Shields limit contaminant ingress, which can reduce cleaning frequency and help preserve lubricant condition between services.

What features support higher rotational speeds?

The bearing is specified for operation up to 4300 r/min and includes a sheet-metal cage to maintain roller spacing at speed.