SKF 32019 X Taper 95 mm ID Roller Bearing, 145 mm OD
- RS-stocknr.:
- 208-0028
- Fabrikantnummer:
- 32019 X
- Fabrikant:
- SKF
Subtotaal (1 eenheid)*
€ 128,10
(excl. BTW)
€ 155,00
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 03 augustus 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 128,10 |
*prijsindicatie
- RS-stocknr.:
- 208-0028
- Fabrikantnummer:
- 32019 X
- Fabrikant:
- SKF
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 95mm | |
| Bore Type | Parallel | |
| Static Load Rating | 270kN | |
| Limiting Speed | 4300rpm | |
| End Type | Shielded | |
| Bearing Dynamic Load Rating | 206kN | |
| Standards/Approvals | No | |
| Cup Width | 24mm | |
| Number of Rows | 1 | |
| Cone Width | 32mm | |
| Outside Diameter | 145mm | |
| Bearing Type | Taper | |
| Alles selecteren | ||
|---|---|---|
Merk SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 95mm | ||
Bore Type Parallel | ||
Static Load Rating 270kN | ||
Limiting Speed 4300rpm | ||
End Type Shielded | ||
Bearing Dynamic Load Rating 206kN | ||
Standards/Approvals No | ||
Cup Width 24mm | ||
Number of Rows 1 | ||
Cone Width 32mm | ||
Outside Diameter 145mm | ||
Bearing Type Taper | ||
- Land van herkomst:
- DE
The SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e the larger the value of e, the larger the contact angle.
Low friction
Enhanced operational reliability
Rigid bearing application
A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved.
Running-in period with reduced temperature peaks
Separable and interchangeable
The inner ring with roller and cage assembly (cone) can be mounted separately from the outer ring (cup). Furthermore, the separable components (fig. 6) are interchangeable. This facilitates mounting, dismounting and also maintenance inspection routines.
Gerelateerde Links
- RS PRO 32019-X Taper 95 mm ID Roller Bearing, 145 mm OD
- NTN 32019XU Taper Roller 95 mm ID Roller Bearing, 145 mm OD
- FAG 33019 Taper Roller 95 mm ID Roller Bearing, 145 mm OD
- SNR 32019A Taper Roller 95 mm ID Roller Bearing, 145 mm OD
- NTN 4T-33019 Taper Roller 95 mm ID Roller Bearing, 145 mm OD
- SKF T4CB 100 Taper Roller 100 mm ID Roller Bearing, 145 mm OD
- SKF 32219 Taper 95 mm ID Roller Bearing, 170 mm OD
- SKF 30219 Taper Roller 95 mm ID Tapered Roller Bearing, 170 mm OD