SKF 32028 X Taper 140 mm ID Roller Bearing, 210 mm OD
- RS-stocknr.:
- 208-0033
- Fabrikantnummer:
- 32028 X
- Fabrikant:
- SKF
Subtotaal (1 eenheid)*
€ 440,54
(excl. BTW)
€ 533,05
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 03 augustus 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 440,54 |
*prijsindicatie
- RS-stocknr.:
- 208-0033
- Fabrikantnummer:
- 32028 X
- Fabrikant:
- SKF
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 140mm | |
| Bore Type | Parallel | |
| End Type | Shielded | |
| Bearing Dynamic Load Rating | 404kN | |
| Standards/Approvals | No | |
| Static Load Rating | 585kN | |
| Limiting Speed | 2800rpm | |
| Cup Width | 34mm | |
| Number of Rows | 1 | |
| Cone Width | 45mm | |
| Outside Diameter | 210mm | |
| Bearing Type | Taper | |
| Alles selecteren | ||
|---|---|---|
Merk SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 140mm | ||
Bore Type Parallel | ||
End Type Shielded | ||
Bearing Dynamic Load Rating 404kN | ||
Standards/Approvals No | ||
Static Load Rating 585kN | ||
Limiting Speed 2800rpm | ||
Cup Width 34mm | ||
Number of Rows 1 | ||
Cone Width 45mm | ||
Outside Diameter 210mm | ||
Bearing Type Taper | ||
- Land van herkomst:
- DE
The SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e the larger the value of e, the larger the contact angle.
Low friction
Enhanced operational reliability
Rigid bearing application
A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved.
Running-in period with reduced temperature peaks
Separable and interchangeable
The inner ring with roller and cage assembly (cone) can be mounted separately from the outer ring (cup). Furthermore, the separable components (fig. 6) are interchangeable. This facilitates mounting, dismounting and also maintenance inspection routines.
Gerelateerde Links
- RS PRO 32028-X Taper 140 mm ID Roller Bearing, 210 mm OD
- SKF T4CB 140 Taper 140 mm ID Roller Bearing, 195 mm OD
- SKF 32313 Taper 65 mm ID Roller Bearing, 140 mm OD
- SKF 30313 Taper 65 mm ID Roller Bearing, 140 mm OD
- SKF 32216 Taper 80 mm ID Roller Bearing, 140 mm OD
- SKF 33018 Taper 90 mm ID Roller Bearing, 140 mm OD
- SKF 33216 Taper 80 mm ID Roller Bearing, 140 mm OD
- SKF 30228 Taper 140 mm ID Roller Bearing, 250 mm OD