SKF 32304 Taper 20 mm ID Roller Bearing, 52 mm OD
- RS-stocknr.:
- 208-0056
- Fabrikantnummer:
- 32304
- Fabrikant:
- SKF
Subtotaal (1 eenheid)*
€ 30,64
(excl. BTW)
€ 37,07
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Tijdelijk niet op voorraad
- Verzending 3 stuk(s) vanaf 15 juni 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 30,64 |
*prijsindicatie
- RS-stocknr.:
- 208-0056
- Fabrikantnummer:
- 32304
- Fabrikant:
- SKF
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 20mm | |
| Bore Type | Parallel | |
| Cage Material | Pressed Steel | |
| End Type | Shielded | |
| Bearing Material | Steel | |
| Number of Rows | 1 | |
| Cup Width | 18mm | |
| Static Load Rating | 46.5kN | |
| Limiting Speed | 14000rpm | |
| Standards/Approvals | No | |
| Bearing Dynamic Load Rating | 44.8kN | |
| Cone Width | 22.25mm | |
| Outside Diameter | 52mm | |
| Race Type | Tapered | |
| Bearing Type | Taper | |
| Alles selecteren | ||
|---|---|---|
Merk SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 20mm | ||
Bore Type Parallel | ||
Cage Material Pressed Steel | ||
End Type Shielded | ||
Bearing Material Steel | ||
Number of Rows 1 | ||
Cup Width 18mm | ||
Static Load Rating 46.5kN | ||
Limiting Speed 14000rpm | ||
Standards/Approvals No | ||
Bearing Dynamic Load Rating 44.8kN | ||
Cone Width 22.25mm | ||
Outside Diameter 52mm | ||
Race Type Tapered | ||
Bearing Type Taper | ||
The SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e the larger the value of e, the larger the contact angle.
Low friction
Enhanced operational reliability
Rigid bearing application
A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved.
Running-in period with reduced temperature peaks
Separable and interchangeable
The inner ring with roller and cage assembly (cone) can be mounted separately from the outer ring (cup). Furthermore, the separable components (fig. 6) are interchangeable. This facilitates mounting, dismounting and also maintenance inspection routines.
Gerelateerde Links
- FAG 32304-A Taper Roller 20 mm ID Roller Bearing, 52 mm OD
- NTN 4T-32304 Taper Roller 20 mm ID Roller Bearing, 52 mm OD
- RS PRO 32304 Taper 20 mm ID Roller Bearing, 52 mm OD
- SKF 30304 Taper 20 mm ID Roller Bearing, 52 mm OD
- SKF 33205 Taper 25 mm ID Roller Bearing, 52 mm OD
- SKF 639174 Taper 26 mm ID Roller Bearing, 52 mm OD
- SKF 320/28 X Taper 28 mm ID Roller Bearing, 52 mm OD
- SKF 32205 BJ2/Q Taper 25 mm ID Roller Bearing, 52 mm OD