SKF 32309 Taper 45 mm ID Roller Bearing, 100 mm OD
- RS-stocknr.:
- 208-0062
- Fabrikantnummer:
- 32309
- Fabrikant:
- SKF
Subtotaal (1 eenheid)*
€ 60,91
(excl. BTW)
€ 73,70
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 17 september 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 60,91 |
*prijsindicatie
- RS-stocknr.:
- 208-0062
- Fabrikantnummer:
- 32309
- Fabrikant:
- SKF
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 45mm | |
| Bore Type | Parallel | |
| Cage Material | Pressed Steel | |
| Roller Material | Steel | |
| Limiting Speed | 7000rpm | |
| Standards/Approvals | No | |
| Bearing Dynamic Load Rating | 145kN | |
| End Type | Shielded | |
| Outside Diameter | 100mm | |
| Static Load Rating | 185kN | |
| Cup Width | 30mm | |
| Number of Rows | 1 | |
| Cone Width | 38.25mm | |
| Bearing Material | Steel | |
| Race Type | Tapered | |
| Bearing Type | Taper | |
| Alles selecteren | ||
|---|---|---|
Merk SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 45mm | ||
Bore Type Parallel | ||
Cage Material Pressed Steel | ||
Roller Material Steel | ||
Limiting Speed 7000rpm | ||
Standards/Approvals No | ||
Bearing Dynamic Load Rating 145kN | ||
End Type Shielded | ||
Outside Diameter 100mm | ||
Static Load Rating 185kN | ||
Cup Width 30mm | ||
Number of Rows 1 | ||
Cone Width 38.25mm | ||
Bearing Material Steel | ||
Race Type Tapered | ||
Bearing Type Taper | ||
- Land van herkomst:
- DE
The SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e the larger the value of e, the larger the contact angle.
Low friction
Enhanced operational reliability
Rigid bearing application
A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved.
Running-in period with reduced temperature peaks
Separable and interchangeable
The inner ring with roller and cage assembly (cone) can be mounted separately from the outer ring (cup). Furthermore, the separable components (fig. 6) are interchangeable. This facilitates mounting, dismounting and also maintenance inspection routines.
Gerelateerde Links
- SKF 32309 BJ2/QCL7C Taper 45 mm ID Roller Bearing, 100 mm OD
- FAG 32309-A Taper Roller 45 mm ID Roller Bearing, 100 mm OD
- RS PRO 32309 Taper 45 mm ID Roller Bearing, 100 mm OD
- SKF 30209 Taper 45 mm ID Roller Bearing, 85 mm OD
- SKF 32209 Taper 45 mm ID Roller Bearing, 85 mm OD
- SKF 33109 Taper 45 mm ID Roller Bearing, 80 mm OD
- SKF T2ED 045 Taper Roller 45 mm ID Roller Bearing, 95 mm OD
- SKF C 2209 KTN9 Taper Roller 45 mm ID Roller Bearing, 85 mm OD