SKF 32313 BJ2/QU4CL7CVQ267 Taper 60 mm ID Roller Bearing, 140 mm OD
- RS-stocknr.:
- 208-0068
- Fabrikantnummer:
- 32313 BJ2/QU4CL7CVQ267
- Fabrikant:
- SKF
Subtotaal (1 eenheid)*
€ 386,86
(excl. BTW)
€ 468,10
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 08 juli 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 386,86 |
*prijsindicatie
- RS-stocknr.:
- 208-0068
- Fabrikantnummer:
- 32313 BJ2/QU4CL7CVQ267
- Fabrikant:
- SKF
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 60mm | |
| Bore Type | Parallel | |
| Limiting Speed | 4800rpm | |
| Outside Diameter | 140mm | |
| Series | 32313 B SKF Explorer | |
| Standards/Approvals | No | |
| Cone Width | 51mm | |
| End Type | Shielded | |
| Bearing Dynamic Load Rating | 305kN | |
| Static Load Rating | 345kN | |
| Cup Width | 39mm | |
| Number of Rows | 1 | |
| Bearing Type | Taper | |
| Alles selecteren | ||
|---|---|---|
Merk SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 60mm | ||
Bore Type Parallel | ||
Limiting Speed 4800rpm | ||
Outside Diameter 140mm | ||
Series 32313 B SKF Explorer | ||
Standards/Approvals No | ||
Cone Width 51mm | ||
End Type Shielded | ||
Bearing Dynamic Load Rating 305kN | ||
Static Load Rating 345kN | ||
Cup Width 39mm | ||
Number of Rows 1 | ||
Bearing Type Taper | ||
- Land van herkomst:
- DE
The SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e the larger the value of e, the larger the contact angle.
Low friction
Enhanced operational reliability
Rigid bearing application
A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved.
Running-in period with reduced temperature peaks
Separable and interchangeable
The inner ring with roller and cage assembly (cone) can be mounted separately from the outer ring (cup). Furthermore, the separable components (fig. 6) are interchangeable. This facilitates mounting, dismounting and also maintenance inspection routines.
Gerelateerde Links
- SKF 32313 Taper 65 mm ID Roller Bearing, 140 mm OD
- FAG 32313-A Taper Roller 65 mm ID Roller Bearing, 140 mm OD
- FAG 32313-BA Taper Roller 65 mm ID Roller Bearing, 140 mm OD
- SKF 32312 BJ2/QCL7C Taper 60 mm ID Roller Bearing, 130 mm OD
- SKF 32317 BJ2 Taper 85 mm ID Roller Bearing, 180 mm OD
- SKF 32205 BJ2/Q Taper 25 mm ID Roller Bearing, 52 mm OD
- SKF 32309 BJ2/QCL7C Taper 45 mm ID Roller Bearing, 100 mm OD
- SKF T4CB 140 Taper 140 mm ID Roller Bearing, 195 mm OD