SKF 33210 Taper 50 mm ID Roller Bearing, 90 mm OD
- RS-stocknr.:
- 208-0101
- Fabrikantnummer:
- 33210
- Fabrikant:
- SKF
Subtotaal (1 eenheid)*
€ 77,86
(excl. BTW)
€ 94,21
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 8 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 77,86 |
*prijsindicatie
- RS-stocknr.:
- 208-0101
- Fabrikantnummer:
- 33210
- Fabrikant:
- SKF
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 50mm | |
| Bore Type | Parallel | |
| Cage Material | Pressed Steel | |
| Cone Width | 32mm | |
| Number of Rows | 1 | |
| Cup Width | 24.5mm | |
| Static Load Rating | 164kN | |
| Outside Diameter | 90mm | |
| Bearing Material | Steel | |
| Limiting Speed | 7000rpm | |
| End Type | Shielded | |
| Bearing Dynamic Load Rating | 118kN | |
| Standards/Approvals | No | |
| Race Type | Tapered | |
| Bearing Type | Taper | |
| Alles selecteren | ||
|---|---|---|
Merk SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 50mm | ||
Bore Type Parallel | ||
Cage Material Pressed Steel | ||
Cone Width 32mm | ||
Number of Rows 1 | ||
Cup Width 24.5mm | ||
Static Load Rating 164kN | ||
Outside Diameter 90mm | ||
Bearing Material Steel | ||
Limiting Speed 7000rpm | ||
End Type Shielded | ||
Bearing Dynamic Load Rating 118kN | ||
Standards/Approvals No | ||
Race Type Tapered | ||
Bearing Type Taper | ||
- Land van herkomst:
- DE
The SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e the larger the value of e, the larger the contact angle.
Low friction
Enhanced operational reliability
Rigid bearing application
A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved.
Running-in period with reduced temperature peaks
Separable and interchangeable
The inner ring with roller and cage assembly (cone) can be mounted separately from the outer ring (cup). Furthermore, the separable components (fig. 6) are interchangeable. This facilitates mounting, dismounting and also maintenance inspection routines.
Gerelateerde Links
- RS PRO 33210 Taper 50 mm ID Roller Bearing, 90 mm OD
- Timken 33210 Taper 50 mm ID Metric Roller Bearing, 90 mm OD
- NTN 4T-33210 Single Row Tapered Roller 50 mm ID Taper Roller Bearing, 90 mm OD
- SKF 32210 Taper 50 mm ID Roller Bearing, 90 mm OD
- SKF 30210 Taper 50 mm ID Tapered Roller Bearing, 90 mm OD
- SKF 33018 Taper 90 mm ID Roller Bearing, 140 mm OD
- SKF 31318 Taper 90 mm ID Roller Bearing, 190 mm OD
- SKF 32218 Taper 90 mm ID Roller Bearing, 160 mm OD