SKF 33214 Taper 70 mm ID Roller Bearing, 125 mm OD
- RS-stocknr.:
- 208-0104
- Fabrikantnummer:
- 33214
- Fabrikant:
- SKF
Subtotaal (1 eenheid)*
€ 145,59
(excl. BTW)
€ 176,16
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 01 juli 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 145,59 |
*prijsindicatie
- RS-stocknr.:
- 208-0104
- Fabrikantnummer:
- 33214
- Fabrikant:
- SKF
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 70mm | |
| Bore Type | Parallel | |
| Static Load Rating | 285kN | |
| End Type | Shielded | |
| Bearing Dynamic Load Rating | 247kN | |
| Standards/Approvals | No | |
| Cone Width | 41mm | |
| Cup Width | 32mm | |
| Limiting Speed | 5000rpm | |
| Number of Rows | 1 | |
| Outside Diameter | 125mm | |
| Bearing Type | Taper | |
| Alles selecteren | ||
|---|---|---|
Merk SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 70mm | ||
Bore Type Parallel | ||
Static Load Rating 285kN | ||
End Type Shielded | ||
Bearing Dynamic Load Rating 247kN | ||
Standards/Approvals No | ||
Cone Width 41mm | ||
Cup Width 32mm | ||
Limiting Speed 5000rpm | ||
Number of Rows 1 | ||
Outside Diameter 125mm | ||
Bearing Type Taper | ||
- Land van herkomst:
- DE
The SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e the larger the value of e, the larger the contact angle.
Low friction
Enhanced operational reliability
Rigid bearing application
A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved.
Running-in period with reduced temperature peaks
Separable and interchangeable
The inner ring with roller and cage assembly (cone) can be mounted separately from the outer ring (cup). Furthermore, the separable components (fig. 6) are interchangeable. This facilitates mounting, dismounting and also maintenance inspection routines.
Gerelateerde Links
- FAG 33214 Taper Roller 70 mm ID Tapered Roller Bearing, 125 mm OD
- SKF 32214 J2/Q Taper 70 mm ID Roller Bearing, 125 mm OD
- SKF 30214 J2/Q Taper 70 mm ID Tapered Roller Bearing, 125 mm OD
- NTN 32214U Taper Roller 70 mm ID Roller Bearing, 125 mm OD
- SNR 32214A Taper Roller 70 mm ID Roller Bearing, 125 mm OD
- NTN 33214U Taper Roller 70 mm ID Roller Bearing, 125 mm OD
- FAG 32214-A Taper Roller 70 mm ID Roller Bearing, 125 mm OD
- SNR 30214A Taper Roller 70 mm ID Tapered Roller Bearing, 125 mm OD