SKF C 2218 K/C3 Taper 90 mm ID Roller Bearing, 160 mm OD
- RS-stocknr.:
- 208-0158
- Fabrikantnummer:
- C 2218 K/C3
- Fabrikant:
- SKF
Subtotaal (1 eenheid)*
€ 631,55
(excl. BTW)
€ 764,18
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 30 juni 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 631,55 |
*prijsindicatie
- RS-stocknr.:
- 208-0158
- Fabrikantnummer:
- C 2218 K/C3
- Fabrikant:
- SKF
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 90mm | |
| Bore Type | Parallel | |
| Series | SKF Explorer | |
| Standards/Approvals | No | |
| Bearing Dynamic Load Rating | 325kN | |
| Cone Width | 40mm | |
| Outside Diameter | 160mm | |
| Limiting Speed | 5300rpm | |
| End Type | Sealed | |
| Number of Rows | 1 | |
| Cup Width | 40mm | |
| Static Load Rating | 380kN | |
| Bearing Type | Taper | |
| Alles selecteren | ||
|---|---|---|
Merk SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 90mm | ||
Bore Type Parallel | ||
Series SKF Explorer | ||
Standards/Approvals No | ||
Bearing Dynamic Load Rating 325kN | ||
Cone Width 40mm | ||
Outside Diameter 160mm | ||
Limiting Speed 5300rpm | ||
End Type Sealed | ||
Number of Rows 1 | ||
Cup Width 40mm | ||
Static Load Rating 380kN | ||
Bearing Type Taper | ||
- Land van herkomst:
- SE
The SKF CARB toroidal roller bearings have one row of long, slightly barrel-shaped symmetrical rollers and torus-shaped raceway profiles. They are non-locating bearings and accommodate exclusively radial loads. CARB bearings are often used to replace the non-locating spherical roller bearing in a locating/non-locating bearing arrangement.
Accommodate misalignment
CARB bearings are self-aligning like spherical roller bearings or self-aligning ball bearings.
Accommodate axial displacement
CARB bearings compensate for thermal expansion of the shaft like cylindrical or needle roller bearings .
Wide assortment of dimension series
CARB bearings are available with the same boundary dimensions as corresponding spherical roller bearings, self-aligning ball bearings, cylindrical roller bearings and needle roller bearings.
Long service life
The special roller profile prevents stress peaks at the roller ends.
Low friction
Self-guiding rollers keep friction and frictional heat at low levels.
Improved wear resistance
All CARB bearings are upgraded SKF Explorer bearings.
Low noise
Gerelateerde Links
- SKF C 2218 K Taper 90 mm ID Roller Bearing, 160 mm OD
- SKF NU 2218 ECM/C3 90 mm ID Roller Bearing, 160 mm OD
- SKF NU 2218 ECJ/C3 90 mm ID Roller Bearing, 160 mm OD
- SKF NU 2218 ECP/C3 90 mm ID Cylindrical Roller Bearing, 160 mm OD
- SKF 2218 K/C3 90 mm ID 2 Row Ball Bearing -, 160 mm OD
- SKF C 2218/C3 Cylindrical 90 mm ID CARB Toroidal Roller Bearing, 160 mm OD
- SKF NU 2218 ECP 90 mm ID Roller Bearing, 160 mm OD
- SKF 2218/C3 90 mm ID 2 Row Ball Bearing -, 160 mm OD