SKF NU 2219 ECJ/C3 95 mm ID Roller Bearing, 170 mm OD
- RS-stocknr.:
- 209-2054
- Fabrikantnummer:
- NU 2219 ECJ/C3
- Fabrikant:
- SKF
Subtotaal (1 eenheid)*
€ 881,95
(excl. BTW)
€ 1.067,16
(incl. BTW)
Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 881,95 |
*prijsindicatie
- RS-stocknr.:
- 209-2054
- Fabrikantnummer:
- NU 2219 ECJ/C3
- Fabrikant:
- SKF
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 95mm | |
| Race Width | 43mm | |
| Bore Type | Taper | |
| Cage Material | Steel | |
| Number of Rows | 1 | |
| Series | NU 2219 ECJ | |
| Standards/Approvals | No | |
| Dynamic Load Rating | 325kN | |
| Outside Diameter | 170mm | |
| Static Load Rating | 375kN | |
| End Type | Open | |
| Limiting Speed | 4800rpm | |
| Alles selecteren | ||
|---|---|---|
Merk SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 95mm | ||
Race Width 43mm | ||
Bore Type Taper | ||
Cage Material Steel | ||
Number of Rows 1 | ||
Series NU 2219 ECJ | ||
Standards/Approvals No | ||
Dynamic Load Rating 325kN | ||
Outside Diameter 170mm | ||
Static Load Rating 375kN | ||
End Type Open | ||
Limiting Speed 4800rpm | ||
- Land van herkomst:
- DE
SKF Cylindrical Roller Bearing, 95 mm ID, 170 mm OD - NU 2219 ECJ/C3
Choose this cylindrical roller bearing from SKF to accommodate heavy radial loads at high speeds. Thanks to its open-flanged design and super-smooth surface finish, the bearing is optimised to promote lubricant film formation, which results in lower friction. This keeps heat generation to a minimum, preventing damage and improving efficiency and reliability. The components of this bearing are separable, so it's quick and simple to install, maintain and inspect.
• Cylindrical roller bearing type combines high load capacity with high speed tolerance
• Tapered bore compensates for friction and supports radial loads
• Inside diameter of 95 mm, outside diameter of 170 mm
• Compact race width of 43 mm
Application Information
• Agricultural equipment
• Air-conditioning compressors
• Pumps
Can this cylindrical roller bearing accommodate shaft displacement?
Yes. The open flange design allows the bearing to accommodate some axial misalignment in the shaft in both directions.
What are the advantages of using a caged bearing?
Cages in bearings help minimise wear and tear and extend the time between maintenance. This bearing uses a stamped low-carbon steel cage, which is lightweight for high speed and sturdy for durability.
Gerelateerde Links
- SKF NU 2219 ECJ 95 mm ID Roller Bearing, 170 mm OD
- SKF NU 2219 ECP/C3 95 mm ID Cylindrical Roller Bearing, 170 mm OD
- SKF NU 219 ECJ/C3 95 mm ID Roller Bearing, 170 mm OD
- SKF NU 2219 ECP 95 mm ID Roller Bearing, 170 mm OD
- SKF NJ 2219 ECP 95 mm ID Cylindrical Roller Bearing, 170 mm OD
- SKF NU 219 ECJ 95 mm ID Roller Bearing, 170 mm OD
- SKF NU 316 ECJ/C3 80 mm ID Roller Bearing, 170 mm OD
- SKF NU 319 ECJ/C3 95 mm ID Roller Bearing, 200 mm OD