SKF NU 2320 ECML/C3 100 mm ID Roller Bearing, 215 mm OD
- RS-stocknr.:
- 209-2094
- Fabrikantnummer:
- NU 2320 ECML/C3
- Fabrikant:
- SKF
Subtotaal (1 eenheid)*
€ 1.860,05
(excl. BTW)
€ 2.250,66
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 17 september 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 1.860,05 |
*prijsindicatie
- RS-stocknr.:
- 209-2094
- Fabrikantnummer:
- NU 2320 ECML/C3
- Fabrikant:
- SKF
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 100mm | |
| Race Width | 73mm | |
| Bore Type | Taper | |
| Roller Material | Steel | |
| Limiting Speed | 6000rpm | |
| Series | NU 2320 ECML SKF Explorer | |
| Standards/Approvals | No | |
| Dynamic Load Rating | 670kN | |
| Outside Diameter | 215mm | |
| Static Load Rating | 735kN | |
| Number of Rows | 1 | |
| End Type | Open | |
| Alles selecteren | ||
|---|---|---|
Merk SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 100mm | ||
Race Width 73mm | ||
Bore Type Taper | ||
Roller Material Steel | ||
Limiting Speed 6000rpm | ||
Series NU 2320 ECML SKF Explorer | ||
Standards/Approvals No | ||
Dynamic Load Rating 670kN | ||
Outside Diameter 215mm | ||
Static Load Rating 735kN | ||
Number of Rows 1 | ||
End Type Open | ||
- Land van herkomst:
- DE
SKF Roller Bearing, 100 mm ID, 215 mm OD - NU 2320 ECML/C3
This cylindrical roller bearing from SKF is ideal for handling low thrust and large radial loads at high speed. It's part of the upgraded SKF Explorer range and is capable of accommodating increased load levels and providing a significantly extended service life. Optimised internal geometry and an advanced surface finish reduces friction and wear, as well as enhancing lubricating conditions. This adds up to reduced noise and vibration and longer lubricant life to increase uptime and productivity. This bearing also provides reduced sensitivity to misalignment.
• Cylindrical bore type for high radial load capacity at high speeds
• Machined brass cage
• Compact structure
• Inside diameter of 100 mm
• Outside diameter of 215 mm
• Race width of 73 mm
Application Information
• Mining industry
• Construction
• Wind turbines
• Transport
What's the advantage of the brass cages on these bearings?
Brass cages are rigid and strong as well as being suitable for use at high temperatures. They are also capable of absorbing lubricant, helping them to continue to perform even when lubrication levels are reduced.
Gerelateerde Links
- SKF NJ 2320 ECML/C3 100 mm ID Roller Bearing, 215 mm OD
- SKF NU 2320 ECML/C4 100 mm ID Cylindrical Roller Bearing, 215 mm OD
- SKF NJ 2320 ECML/C4 100 mm ID Cylindrical Roller Bearing, 215 mm OD
- SKF NU 2224 ECML/C3 120 mm ID Roller Bearing, 215 mm OD
- SKF NU 2320 ECJ/C3 100 mm ID Cylindrical Roller Bearing, 215 mm OD
- SKF NU 320 ECML/C3 100 mm ID Cylindrical Roller Bearing, 215 mm OD
- SKF NJG 2320 VH/C3 100 mm ID Cylindrical Roller Bearing, 215 mm OD
- SKF NJ 2320 ECJ/C3 100 mm ID Cylindrical Roller Bearing, 215 mm OD