SKF PHC 25-1 Offset Link Carbon Steel Roller Chain Link
- RS-stocknr.:
- 267-9797
- Fabrikantnummer:
- PHC 25-1O/L
- Fabrikant:
- SKF
Subtotaal (1 eenheid)*
€ 2,39
(excl. BTW)
€ 2,89
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- Plus verzending 33 stuk(s) vanaf 07 september 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 2,39 |
*prijsindicatie
- RS-stocknr.:
- 267-9797
- Fabrikantnummer:
- PHC 25-1O/L
- Fabrikant:
- SKF
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SKF | |
| Product Type | Roller Chain Link | |
| Chain Type | 25-1 | |
| Mechanical Link Type | Offset Link | |
| Material | Carbon Steel | |
| Pitch | 6.35mm | |
| Series | PHC | |
| Pin Type | Transmission Chain Link | |
| Standards/Approvals | ANSI | |
| Roller Diameter | 3.3mm | |
| Alles selecteren | ||
|---|---|---|
Merk SKF | ||
Product Type Roller Chain Link | ||
Chain Type 25-1 | ||
Mechanical Link Type Offset Link | ||
Material Carbon Steel | ||
Pitch 6.35mm | ||
Series PHC | ||
Pin Type Transmission Chain Link | ||
Standards/Approvals ANSI | ||
Roller Diameter 3.3mm | ||
- Land van herkomst:
- CN
SKF PHC Series Roller Chain Link, 6.35mm Pitch, 3.3mm Roller Diameter - PHC 25-1O/L
This roller chain link provides a short connector for power-transmission chains where an odd number of pitches is required. It is an offset transmission link manufactured from carbon steel to join chain runs in industrial drive systems, meeting ANSI chain standards for compatibility in mechanical assemblies.
Features & Benefits
• 6.35mm pitch supports standardised chain spacing and drive alignment
• 3.3mm roller diameter reduces wear and maintains smooth engagement
• Offset link geometry enables odd-pitch chain lengths for design flexibility
• Transmission pin configuration allows straightforward assembly and removal
• 3.3mm roller diameter reduces wear and maintains smooth engagement
• Offset link geometry enables odd-pitch chain lengths for design flexibility
• Transmission pin configuration allows straightforward assembly and removal
**Applications**
• Suitable for conveyor drives requiring odd-pitch adjustment
• Ideal for sprocket systems in automated machinery
• Used with light-duty power-transmission assemblies in electronics manufacturing
• Can be used for maintenance splicing in mechanical handling systems
• Ideal for sprocket systems in automated machinery
• Used with light-duty power-transmission assemblies in electronics manufacturing
• Can be used for maintenance splicing in mechanical handling systems
How does the link affect chain serviceability?
The offset link is designed for simple disassembly and replacement, enabling quick repairs and minimal downtime during maintenance tasks.
What compatibility should be checked before installation?
Verify sprocket and chain numbers conform to ANSI spacing and that the pitch matches 6.35 mm to ensure proper meshing.
How does the material choice influence operational behaviour?
Carbon steel provides suitable strength for frequent cyclic loads and gives predictable wear characteristics under typical industrial lubrication regimes.
Is this link suitable for duplex configurations?
A duplex variant exists for use in twin-strand chain assemblies, permitting increased load capacity when required.
Gerelateerde Links
- SKF PHC Offset Link Carbon Steel Roller Chain Link
- SKF PHC 100-1 Offset Link Carbon Steel Roller Chain Link
- SKF PHC 05B-1 Offset Link Carbon Steel Roller Chain Link
- SKF PHC 10B-1 Offset Link Carbon Steel Roller Chain Link
- SKF PHC 35-1 Offset Link Carbon Steel Roller Chain Link
- SKF PHC 41-1 Offset Link Carbon Steel Roller Chain Link
- SKF PHC 08B-2 Offset Link Carbon Steel Roller Chain Link
- SKF PHC 140-1 Offset Link Carbon Steel Roller Chain Link