Omron ER Rope Pull Switch 188 mm, Any Position, 3 NC

RS-stocknr.:: 214-7509
Fabrikantnummer:: 44506-4030 ER5018-030M
Fabrikant:: Omron

Omron ER Rope Pull Switch 188 mm, Any Position, 3 NC

Subtotaal (1 eenheid)*

€ 233,11

(excl. BTW)

€ 282,06

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Tijdelijk niet op voorraad

Verzending 2 stuk(s) vanaf 26 mei 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 233,11

*prijsindicatie

RS-stocknr.:: 214-7509
Fabrikantnummer:: 44506-4030 ER5018-030M
Fabrikant:: Omron

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Omron
	Product Type	Rope Pull Switch
	Contact Configuration	3 NC
	Mounting Orientation	Any Position
	Indicator Type	Rope Tension
	IP Rating	IP67
	Number of Cable Entries	3
	Series	ER
	Reset Button	Yes
	Contact DC Voltage	24V dc
	E-Stop Button	Yes
	Contact AC Voltage	120V
	Minimum Operating Temperature	-25°C
	Contact Current	2.5A
	Maximum Operating Temperature	80°C
	Depth	74mm
	Housing Material	Die Cast Aluminium
	Width	57mm
	Standards/Approvals	BS5304, IEC947-5-1, EN418, IEC947-5-5, UL508
	Length	188mm
	Hazardous Area Certification	NO
	Conduit Entry	M20 x 3
	Mechanical Life	1000000Operations

	Alles selecteren
	Merk Omron
	Product Type Rope Pull Switch
	Contact Configuration 3 NC
	Mounting Orientation Any Position
	Indicator Type Rope Tension
	IP Rating IP67
	Number of Cable Entries 3
	Series ER
	Reset Button Yes
	Contact DC Voltage 24V dc
	E-Stop Button Yes
	Contact AC Voltage 120V
	Minimum Operating Temperature -25°C
	Contact Current 2.5A
	Maximum Operating Temperature 80°C
	Depth 74mm
	Housing Material Die Cast Aluminium
	Width 57mm
	Standards/Approvals BS5304, IEC947-5-1, EN418, IEC947-5-5, UL508
	Length 188mm
	Hazardous Area Certification NO
	Conduit Entry M20 x 3
	Mechanical Life 1000000Operations

Omron Series ER Rope Pull Switch, IP67, 3NC Contact Configuration - 44506-4030 ER5018-030M

This rope-pull switch provides an emergency-stop function for continuous-process environments where an accessible rope-actuated disconnect is required. Housed in a robust die-cast aluminium enclosure with an IP67 ingress rating, it is intended for installation where a tensioned rope needs to trigger a safe disconnection in automated and mechanical systems. The unit includes an emergency-stop and reset facility Plus an indicator to show rope-tension status.

Features & Benefits

• 3NC contact arrangement enables positive safety circuit interruption
• Rated for 120V AC and 24V DC to suit control circuits
• Contact current capacity of 2.5A supports low-power control devices
• Mechanical endurance of 1,000,000 operations reduces maintenance intervals
• Operable between -25°C and 80°C for wide ambient suitability
• Three cable entries with M20 x 3 conduit threads allow flexible wiring

Applications

• Suitable for conveyor-line emergency stops in manufacturing plants
• Ideal for access ways and long-run guard protection on assembly lines
• used with rope-actuated safety systems in textile facilities
• Can be used for stop control on material-handling equipment

How is the unit reset after actuation?

It features a manual reset button that requires operator action to restore the contacts after an emergency stop has been triggered.

What indication is provided to confirm rope tension?

A built-in indicator displays rope-tension status so maintenance staff can verify correct alignment and tension without disassembly.

Which orientations are allowed for installation?

The device can be mounted in any position, providing flexibility for different routing and envelope constraints.

What enclosure material and protection level are specified for harsh environments?

The case is die-cast aluminium and the assembly is sealed to IP67, protecting internal components from dust and temporary immersion.