Telemecanique Sensors XY2-CE Rope Pull Switch 142 mm, Left Side, 1 NO/1 NC

Bekijk alle Rope Pull Switches

Subtotaal (1 eenheid)*

€ 454,83

(excl. BTW)

€ 550,34

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Beperkte voorraad
  • 12 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
1 +€ 454,83

*prijsindicatie

RS-stocknr.:
610-0257
Artikelnummer Distrelec:
304-23-867
Fabrikantnummer:
XY2CE2A250
Fabrikant:
Telemecanique Sensors
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Telemecanique Sensors

Product Type

Rope Pull Switch

Mounting Orientation

Left Side

Contact Configuration

1 NO/1 NC

IP Rating

IP65

Number of Cable Entries

3

Series

XY2-CE

Contact AC Voltage

240V ac

Reset Button

Yes

Contact DC Voltage

250V dc

Contact Current

3A

E-Stop Button

Yes

Minimum Operating Temperature

-25°C

Maximum Operating Temperature

70°C

Standards/Approvals

No

Housing Material

Zamak (Body), Stainless Steel (Cover)

Length

142mm

Depth

105mm

Width

229mm

Hazardous Area Certification

No

Mechanical Life

10Cycles

Conduit Entry

PG13.5

Telemecanique Sensors Emergency Stop Rope Pull Switch


The Telemecanique Sensors XY2CJ series emergency stop rope pull switch has a 1NO/1NC contact configuration. It has Zamak housing and maximum AC/DC voltage is 240VAC and 250VDC and the current rating of the switch is 3A and 270mA for AC and DC respectively. It is designed to prevent injury to people or damage to machinery when a normal emergency stop function is not available. This product is easy to install and offers a quick visual check of the switch status for machine restart. This switch has a rope span of 50m and the mounting orientation is to the left side.

Note:

Manufacturer part numbers with the suffix H29 are the ISO M20 threaded cable entry version.

Features and Benefits


Switches incorporate positive opening operation contacts with the tripping of the switch being made with positive action

Switch latches in the tripped position (N/C safety contact(s) open)

Function of the N/O contact is purely for signalling

Incorporates a reset button, which re-closes the safety contact(s), restarting of the machine must only be achieved by manual operation of a control device within the machine start circuit, remote to the trip wire switch

Recommended distance between cable supports is 50m

Comes with a pilot light (direct supply)

Size of cable entry is PG13.5

Certifications


EN/ISO 13850:2006

IP65 rated

Gerelateerde Links