SICK FXL1 Series Safety Controller, 2 Safety Outputs, 24V dc

This safety controller is a Compact industrial module designed to monitor and control safety-related functions in access and interlocking applications. It operates from a 24V DC supply and provides two self-monitoring semiconductor safety outputs suitable for integration with safety relays or safe evaluation units. The unit is built for harsh environments, with multiple enclosure ratings and stainless-steel connector elements, and supports diagnostic displays for status and actuator monitoring.

• Category 4 safety architecture delivers high fault tolerance
• PFHD 9.55 x 10^-9 supports long mission-time performance
• Contact current up to 100mA allows standard sensor loads
• M12 connector simplifies robust field wiring
• Peak current 800mA for short-duration activation support

• Used with guarded doors requiring interlocking monitoring
• Suitable for integration with safe evaluation units
• Ideal for safety loop topologies using Flexi Loop nodes
• Can be used for series connection to safety relays

The enclosure meets IP65, IP67 and IP69K protection levels, supporting washdown and dusty environments.

It provides LEDs for status display and diagnostic indicators for actuator and application monitoring.

There are two PNP semiconductor safety outputs that are short-circuit protected and cross-circuit monitored with output currents ≤ 100mA and an application diagnostic output ≤ 50mA.

The switch-on time is 3 s, response time ≤ 150 MS, release time ≤ 350 MS and risk time 150 MS for safety reactions.

The housing is VISTAL®, with stainless-steel brackets and plug connectors, and mechanical life rated at 1 x 10^6 switching cycles.