Schmersal AZ201 Limit Switch, Fibreglass Reinforced Thermoplastic, Handle

RS-stocknr.:: 206-5768
Fabrikantnummer:: 103013494
Fabrikant:: Schmersal

Schmersal AZ201 Limit Switch, Fibreglass Reinforced Thermoplastic, Handle

Subtotaal (1 eenheid)*

€ 255,30

(excl. BTW)

€ 308,91

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Tijdelijk niet op voorraad

Verzending 1 stuk(s) vanaf 05 oktober 2026
Plus verzending 8 stuk(s) vanaf 02 november 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 255,30

*prijsindicatie

RS-stocknr.:: 206-5768
Fabrikantnummer:: 103013494
Fabrikant:: Schmersal

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Schmersal
	Product Type	Limit Switch
	Lock Type	Handle
	Actuator Included	No
	Safety Contacts	2
	Housing Material	Fibreglass Reinforced Thermoplastic
	Series	AZ201
	Contact AC Voltage	24V ac
	Minimum Operating Temperature	-25°C
	IP Rating	IP67
	Switch Contact Current	1200mA
	Hazardous Area Certification	No
	Maximum Operating Temperature	60°C
	Width	84mm
	Depth	115mm
	Length	50mm
	Standards/Approvals	ISO, IEC

	Alles selecteren
	Merk Schmersal
	Product Type Limit Switch
	Lock Type Handle
	Actuator Included No
	Safety Contacts 2
	Housing Material Fibreglass Reinforced Thermoplastic
	Series AZ201
	Contact AC Voltage 24V ac
	Minimum Operating Temperature -25°C
	IP Rating IP67
	Switch Contact Current 1200mA
	Hazardous Area Certification No
	Maximum Operating Temperature 60°C
	Width 84mm
	Depth 115mm
	Length 50mm
	Standards/Approvals ISO, IEC

Datsheet - 103013494

Land van herkomst:: DE

Schmersal AZ201 Series Limit Switch, IP67, 1200mA Switch Contact Current - 103013494

This limit switch is a Compact safety device designed to detect and control mechanical movement in industrial environments. It provides secure switching for low-voltage control circuits and is intended for installations where ingress protection and a sturdy enclosure are required. The unit is not certified for hazardous areas and is supplied without an actuator.

Features and Benefits:

• IP67-rated enclosure protects against dust and immersion
• Fibreglass-reinforced thermoplastic housing offers chemical resistance
• Two safety contacts deliver straightforward contact switching capability
• Handle lock mechanism permits secure manual locking of the switch
• 24V AC switching at 1200mA supports low-voltage control circuits
• Operates between -25 to 60°C for varied ambient conditions

Applications

• Suitable for conveyor end-of-travel detection in washdown zones
• Ideal for machine panels requiring dust and water protection
• Used with low-voltage control systems in manufacturing lines
• Can be used for access interlock where handle locking is needed
• Suitable for outdoor enclosures within non-hazardous premises

Is an actuator fitted with the unit?

No, the device is supplied without an actuator and requires a compatible actuator to be fitted on site.

What standards cover the design of this switch?

The switch is built in accordance with ISO and IEC standards referenced for performance and testing.

What are the electrical switching limits I should expect?

The contact ratings permit switching at 24V AC with a maximum current of 1200mA.

Can this be used in classified hazardous locations?

It is not certified for hazardous area installation and should only be used in non-hazardous environments.

What materials and construction contribute to environmental resistance?

The enclosure is formed from fibreglass-reinforced thermoplastic and the overall construction achieves an IP67 ingress rating.