Schneider Electric Preventa, 24V ac/dc Safety Relay, 5 Safety Contacts, 8
- RS-stocknr.:
- 201-1466
- Fabrikantnummer:
- XPSUAT13A3AC
- Fabrikant:
- Schneider Electric
Subtotaal (1 eenheid)*
€ 336,85
(excl. BTW)
€ 407,59
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 3 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 336,85 |
*prijsindicatie
- RS-stocknr.:
- 201-1466
- Fabrikantnummer:
- XPSUAT13A3AC
- Fabrikant:
- Schneider Electric
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Schneider Electric | |
| Product Type | Safety Relay | |
| Safety Contacts | 5 | |
| Contact Configuration | 2 NC | |
| Number of Auxiliary Contacts | 8 | |
| Mount Type | DIN Rail | |
| Series | Preventa | |
| Power Consumption | 3W | |
| Terminal Type | Spring Terminal | |
| IP Rating | IP20 | |
| Standards/Approvals | RoHS | |
| Switching AC Voltage | 250V ac | |
| Switching DC Voltage | 250V dc | |
| Contact Current | 5A | |
| Length | 100mm | |
| Height | 120mm | |
| Width | 45mm | |
| Safety Category | PLe Category 4 | |
| Hazardous Area Certification | No | |
| Coil Voltage | 24V ac/dc | |
| Alles selecteren | ||
|---|---|---|
Merk Schneider Electric | ||
Product Type Safety Relay | ||
Safety Contacts 5 | ||
Contact Configuration 2 NC | ||
Number of Auxiliary Contacts 8 | ||
Mount Type DIN Rail | ||
Series Preventa | ||
Power Consumption 3W | ||
Terminal Type Spring Terminal | ||
IP Rating IP20 | ||
Standards/Approvals RoHS | ||
Switching AC Voltage 250V ac | ||
Switching DC Voltage 250V dc | ||
Contact Current 5A | ||
Length 100mm | ||
Height 120mm | ||
Width 45mm | ||
Safety Category PLe Category 4 | ||
Hazardous Area Certification No | ||
Coil Voltage 24V ac/dc | ||
- Land van herkomst:
- ID
Schneider Electric Preventa Range of Safety Relays - XPS Universal Range
The XPSUAT range of safety relay modules is used for providing protection for both the user and the machine through immediately stopping the dangerous movement when instructed to do so from the user or if there is the detection of a problem within the safety circuit. These types of safety relays are predominantly used for monitoring applications such as:
• Monitoring Emergency stop circuits
• Switches activated by protection devices
• Mechanical guard switches
• Magnetic switch with antivalent or 2 NC contacts
• Proximity safety switch with antivalent contacts
• PNP Sensor
• 1 PNP + NPN sensor
• RFID safety switch
• Type 4 light curtains
• 4-wire sensing mats or edges
• In addition to the stop category 0 instantaneous opening safety outputs, the XPSUAT safety modules incorporate stop category 1-time delay outputs which allow controlled deceleration of the motor to a complete stop (for example, motor braking by variable speed drive). At the end of the pre-set delay, the supply is disconnected by opening the time-delayed output circuits. Also, the time delay from 0.1 s to 15 min can be selected by selector switches on the front face
Features & Benefits
• Functions can be configured by selector switches on the front face
• A solid-state diagnostic output with complete status information facilitates maintenance
• To monitor a higher number of antivalent contacts using this safety module, the antivalent contacts can be connected with a NC in series and NO in parallel
• 8 LEDs on the front face provide information on the monitoring circuit status
• 27 terminals with a safe expansion connection
• Removable terminal blocks for the connection type
• Automatic, manual and monitored starts
• 2 positive safety inputs 24 VDC, 1 negative safety input
• 4 ON/OFF configurable pulsed outputs
Schneider Electric Preventa Safety Module - XPSUAT13A3AC
• Safety levels for the relay include: Can reach PL e/category 4 for normally open relay contact conforming to ISO 13849-1, Can reach SILCL 3 for normally open relay contact conforming to IEC 62061, Can reach SIL 3 for normally open relay contact conforming to IEC 61508, Can reach PL c/category 1 for normally closed relay contact conforming to ISO 13849-1, Can reach SILCL 1 for normally closed relay contact conforming to IEC 62061 and Can reach SIL 1 for normally closed relay contact conforming to IEC 61508
• NC pair, PNP pair, Antivalent pair and OSSD pair electrical circuit type
• Forms part of the preventa safety automation range of products
• This relay has a rated supply voltage of 24 V AC - 15...10 % and 24 V DC - 20...20 %
• The device has an internal and electronic input protection type
• Associated fuse rating: 10A gG for NO relay output circuit
• Conventional free air thermal current: 16A
• Maximum line resistance: 60O
Gerelateerde Links
- Schneider Electric Preventa 5 Safety Contacts, 8
- Schneider Electric Preventa 2 Safety Contacts, 8
- Schneider Electric Preventa 3 Safety Contacts, 8
- Schneider Electric Preventa 7 Safety Contacts, 8
- Schneider Electric Preventa 1 Safety Contacts, 8
- Schneider Electric Preventa, 24V ac/dc Safety Relay
- Schneider Electric Preventa 5 Safety Contacts
- Schneider Electric Preventa 5 Safety Contacts, 4