Omron G7SA, 12V Safety Relay

RS-stocknr.:: 214-7688
Fabrikantnummer:: G7SA-2A2B 12VDC
Fabrikant:: Omron

Subtotaal (1 eenheid)*

€ 31,10

(excl. BTW)

€ 37,63

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Tijdelijk niet op voorraad

Verzending 12 stuk(s) vanaf 03 november 2026
Plus verzending 12 stuk(s) vanaf 17 november 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 31,10

*prijsindicatie

Alternatief

Dit product is momenteel niet beschikbaar. Hierbij onze aanbeveling voor een alternatief product.

Omron PCB Force Guided Relay, 12V Coil Voltage

RS-stocknr.: 214-6817

Per stuk

€ 36,68

(excl. BTW)

€ 44,38

(incl. BTW)

RS-stocknr.:: 214-7688
Fabrikantnummer:: G7SA-2A2B 12VDC
Fabrikant:: Omron

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Omron
	Product Type	Safety Relay
	Contact Configuration	DPST
	Mount Type	PCB
	Series	G7SA
	Power Consumption	360mW
	Terminal Type	PCB
	Switching AC Voltage	250V ac
	Contact Current	6A
	Switching DC Voltage	125V dc
	Standards/Approvals	CSA, EN, UR
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	85°C
	Length	40mm
	Width	13mm
	Height	24mm
	Hazardous Area Certification	No
	Safety Category	1
	Coil Voltage	12V

	Alles selecteren
	Merk Omron
	Product Type Safety Relay
	Contact Configuration DPST
	Mount Type PCB
	Series G7SA
	Power Consumption 360mW
	Terminal Type PCB
	Switching AC Voltage 250V ac
	Contact Current 6A
	Switching DC Voltage 125V dc
	Standards/Approvals CSA, EN, UR
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature 85°C
	Length 40mm
	Width 13mm
	Height 24mm
	Hazardous Area Certification No
	Safety Category 1
	Coil Voltage 12V

Omron G7SA Series Safety Relay, 12V Coil Voltage, DPST Contact Configuration - G7SA-2A2B 12VDC

This safety relay provides a compact, low‑power solution for monitoring and controlling machinery within automated and electronic systems. Designed for PCB mounting, it functions as a double‑pole single‑throw switching device that supports both AC and DC loads, offering straightforward integration into control circuits in industrial settings.

Features & Benefits

• 12V Coil voltage delivers compatible control with standard DC supplies
• 6A contact rating enables handling moderate current loads
• 360 mW power consumption reduces control‑circuit draw
• Switching capability to 250V AC supports common mains‑level switching
• Operating range from −40 to 85 °C permits use in varied temperature environments

Applications

• Suitable for safety interlock circuits in assembly machinery
• Ideal for retrofit of control panels requiring PCB‑mounted relays
• Used for monitoring emergency‑stop chains in automation lines
• Can be used for DC isolation in battery‑backed control systems

What Terminal arrangement does it use and how does that affect PCB layout?

It uses PCB‑mounted terminals with a DPST contact configuration, allowing two independent switching paths to be routed directly through the board and simplifying track organisation for redundant safety circuits.

How does its power consumption influence control supply sising?

At 360 mW Coil consumption, the design requires only a small fraction of typical 12V control supply capacity, permitting more Compact power supplies or higher device counts on a single rail.

What are the ambient temperature limits for reliable operation?

The unit is rated to operate between −40 and 85 °C, enabling deployment in chilled or heated plant areas without additional thermal management.

What switching voltages and currents can be expected during normal operation?

Contacts are specified for switching up to 250V AC and up to 125V DC with a continuous contact current capability of 6 A, suitable for control and protective functions rather than primary power delivery.