SICK UE401, 24V dc Safety Relay
- RS-stocknr.:
- 492-4972
- Fabrikantnummer:
- UE401-A0010
- Fabrikant:
- SICK
Subtotaal (1 eenheid)*
€ 539,34
(excl. BTW)
€ 652,60
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 6 stuk(s) klaar voor verzending
- 5 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 539,34 |
*prijsindicatie
- RS-stocknr.:
- 492-4972
- Fabrikantnummer:
- UE401-A0010
- Fabrikant:
- SICK
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SICK | |
| Product Type | Safety Relay | |
| Mount Type | Snap-On | |
| Series | UE401 | |
| Power Consumption | 3.6W | |
| Terminal Type | Screw | |
| IP Rating | IP20 | |
| Switching DC Voltage | 24V | |
| Standards/Approvals | ISO13849-1, EN60947-5-5, EN60947-5-1, ISO13850 | |
| Minimum Operating Temperature | -20°C | |
| Maximum Operating Temperature | 55°C | |
| Height | 99mm | |
| Length | 66mm | |
| Width | 22.6mm | |
| Hazardous Area Certification | ATEX, IECEx | |
| Safety Category | PLe Category 4 | |
| Coil Voltage | 24V dc | |
| Alles selecteren | ||
|---|---|---|
Merk SICK | ||
Product Type Safety Relay | ||
Mount Type Snap-On | ||
Series UE401 | ||
Power Consumption 3.6W | ||
Terminal Type Screw | ||
IP Rating IP20 | ||
Switching DC Voltage 24V | ||
Standards/Approvals ISO13849-1, EN60947-5-5, EN60947-5-1, ISO13850 | ||
Minimum Operating Temperature -20°C | ||
Maximum Operating Temperature 55°C | ||
Height 99mm | ||
Length 66mm | ||
Width 22.6mm | ||
Hazardous Area Certification ATEX, IECEx | ||
Safety Category PLe Category 4 | ||
Coil Voltage 24V dc | ||
Vrijgesteld
- Land van herkomst:
- GB
L4000, Type 4 Single/Multibeam System
The L4000 is a single/multi beam, non contact, safety system using a sender and a receiver arrangement and is certified according to IEC 61496 safety category Type 4.,The system consists of the UE401 controller to which, sender and receivers can be connected. Up to 4 sensor pairs can be connected to the UE401
Applications:
This device is intended for body detection of an operator under normal approach conditions toward a hazardous area
Features:
Easy installation
7 segment display
Integrated alignment aid
Reset and External Device Monitoring
2 OSSD (Output Signal Switching Device) outputs
Short response time 30ms
IP67 sender and receiver
Single Beam Safety Device
Note
Installation and operation of this safety device must be in strict accordance with accompanying operating instruction. Further guidance on the use of Active Opto-electronic Protective Devices (AOPD) is available from Health & Safety Executive guidance note HSG180.
