STMicroelectronics 170 V 1 A Diode Schottky 2-Pin SMA
- RS-stocknr.:
- 203-3445P
- Fabrikantnummer:
- STPS1170AFN
- Fabrikant:
- STMicroelectronics
Momenteel niet beschikbaar
We weten niet of dit item nog op voorraad komt, RS is van plan dit binnenkort uit ons assortiment te halen.
- RS-stocknr.:
- 203-3445P
- Fabrikantnummer:
- STPS1170AFN
- Fabrikant:
- STMicroelectronics
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | STMicroelectronics | |
| Product Type | Diode | |
| Mount Type | Surface | |
| Package Type | SMA | |
| Maximum Continuous Forward Current If | 1A | |
| Peak Reverse Repetitive Voltage Vrrm | 170V | |
| Diode Configuration | Single | |
| Series | STPS1170 | |
| Rectifier Type | Schottky | |
| Pin Count | 2 | |
| Peak Reverse Current Ir | 1.5mA | |
| Maximum Forward Voltage Vf | 0.62V | |
| Peak Non-Repetitive Forward Surge Current Ifsm | 45A | |
| Minimum Operating Temperature | -65°C | |
| Maximum Operating Temperature | 175°C | |
| Standards/Approvals | No | |
| Width | 2.9 mm | |
| Diameter | 1.65 mm | |
| Length | 4.6mm | |
| Height | 1.1mm | |
| Automotive Standard | No | |
| Alles selecteren | ||
|---|---|---|
Merk STMicroelectronics | ||
Product Type Diode | ||
Mount Type Surface | ||
Package Type SMA | ||
Maximum Continuous Forward Current If 1A | ||
Peak Reverse Repetitive Voltage Vrrm 170V | ||
Diode Configuration Single | ||
Series STPS1170 | ||
Rectifier Type Schottky | ||
Pin Count 2 | ||
Peak Reverse Current Ir 1.5mA | ||
Maximum Forward Voltage Vf 0.62V | ||
Peak Non-Repetitive Forward Surge Current Ifsm 45A | ||
Minimum Operating Temperature -65°C | ||
Maximum Operating Temperature 175°C | ||
Standards/Approvals No | ||
Width 2.9 mm | ||
Diameter 1.65 mm | ||
Length 4.6mm | ||
Height 1.1mm | ||
Automotive Standard No | ||
The STMicroelectronics 170 V Schottky rectifier suited for switch mode power supplies and high frequency DC to DC converters. It is packaged in SMA Flat and SMA Flat Notch, the STPS1170 is ideal for use in low voltage, high frequency inverters, freewheeling and polarity protection. It is also ideal for all LED lighting applications where efficiency and space constraint are required.
High junction temperature capability
Negligible switching losses
Very small conduction losses with low leakage current
Avalanche rated and ECOPACK2 component