Infineon 70 V 70 mA Rectifier & Schottky Diode Schottky 2-Pin SC-79

RS-stocknr.:: 249-6982
Fabrikantnummer:: BAS7002VH6327XTSA1
Fabrikant:: Infineon

Infineon 70 V 70 mA Rectifier & Schottky Diode Schottky 2-Pin SC-79

Bulkkorting beschikbaar

Bekijk bulkkorting

Subtotaal (3000 eenheden, op een rol van 3000)*

€ 168,00

(excl. BTW)

€ 204,00

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Tijdelijk niet op voorraad

Verzending 15.000 stuk(s) vanaf 25 maart 2027

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk	Per rol*
3000 - 3000	€ 0,056	€ 168,00
6000 - 12000	€ 0,053	€ 159,00
15000 +	€ 0,05	€ 150,00

*prijsindicatie

RS-stocknr.:: 249-6982
Fabrikantnummer:: BAS7002VH6327XTSA1
Fabrikant:: Infineon

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Infineon
	Product Type	Rectifier & Schottky Diode
	Mount Type	Surface
	Package Type	SC-79
	Maximum Continuous Forward Current If	70mA
	Peak Reverse Repetitive Voltage Vrrm	70V
	Diode Configuration	Single
	Series	BAS70
	Rectifier Type	Schottky
	Pin Count	2
	Maximum Forward Voltage Vf	1000mV
	Minimum Operating Temperature	-55°C
	Peak Non-Repetitive Forward Surge Current Ifsm	100mA
	Peak Reverse Current Ir	0.1μA
	Maximum Operating Temperature	125°C
	Height	0.8mm
	Standards/Approvals	RoHS
	Width	0.55mm
	Length	1.6mm
	Automotive Standard	AEC-Q101

	Alles selecteren
	Merk Infineon
	Product Type Rectifier & Schottky Diode
	Mount Type Surface
	Package Type SC-79
	Maximum Continuous Forward Current If 70mA
	Peak Reverse Repetitive Voltage Vrrm 70V
	Diode Configuration Single
	Series BAS70
	Rectifier Type Schottky
	Pin Count 2
	Maximum Forward Voltage Vf 1000mV
	Minimum Operating Temperature -55°C
	Peak Non-Repetitive Forward Surge Current Ifsm 100mA
	Peak Reverse Current Ir 0.1μA
	Maximum Operating Temperature 125°C
	Height 0.8mm
	Standards/Approvals RoHS
	Width 0.55mm
	Length 1.6mm
	Automotive Standard AEC-Q101

Datasheet - BAS7002VH6327XTSA1

Infineon BAS70 Series Rectifier & Schottky Diode, 70V Peak Reverse Repetitive Voltage, 70mA Max Continuous Forward Current - BAS7002VH6327XTSA1

This rectifier & schottky diode is a single‑pack surface‑mount device designed for low‑voltage switching and rectification in constrained electronic assemblies. It operates across a wide thermal range and is manufactured to meet industry environmental restrictions, making it suitable for Compact circuits requiring Rapid recovery and minimal forward drop.

Features and Benefits:

• Low forward voltage 1000mV reduces conduction losses
• Max continuous forward current 70mA supports light signal loads
• Peak reverse repetitive voltage 70V allows moderate reverse blocking
• Peak non rep forward surge current Ifsm100mA tolerates short transients
• Very low reverse leakage 0.1μA minimises standby current
• Qualified to AEC‑Q101 for automotive temperature stresses

Applications

• Suitable for portable power‑management circuits in Compact devices
• Ideal for reverse‑polarity protection in sensor interfaces
• Used with high‑density assemblies requiring SMD rectifiers
• Can be used for clamp and steering diodes in signal paths
• Appropriate for automotive electronics requiring automotive qualification

What temperature extremes can it withstand in operation?

It operates reliably from −55°C up to 125°C.

How many electrical connections does it provide for PCB layout?

It has two terminals for straightforward surface mounting.

What package should I plan for on the board footprint?

The device uses an SC‑79 style SMD outline suitable for small footprints.

Is it compliant with material restriction directives?

The construction conforms to RoHS requirements.

How does it behave under repeated reverse voltage conditions?

It is rated for a Peak reverse repetitive voltage of 70V for repeated blocking use.