WAGO Precision, 3.5 x 0.5 mm Tip, 3.5 mm Blade, 100 mm Overall
- RS-stocknr.:
- 753-0693
- Fabrikantnummer:
- 210-658
- Fabrikant:
- WAGO
Subtotaal (1 eenheid)*
€ 6,80
(excl. BTW)
€ 8,23
(incl. BTW)
Voeg 12 eenheden toe voor gratis bezorging
Informatie over voorraden is momenteel niet toegankelijk
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 6,80 |
*prijsindicatie
- RS-stocknr.:
- 753-0693
- Fabrikantnummer:
- 210-658
- Fabrikant:
- WAGO
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | WAGO | |
| Product Type | Screwdriver | |
| Screwdriver Type | Precision | |
| Tip Size | 3.5 x 0.5 mm | |
| VDE/1000V Approved | No | |
| Blade Length | 3.5mm | |
| Overall Length | 100mm | |
| Standards/Approvals | No | |
| Alles selecteren | ||
|---|---|---|
Merk WAGO | ||
Product Type Screwdriver | ||
Screwdriver Type Precision | ||
Tip Size 3.5 x 0.5 mm | ||
VDE/1000V Approved No | ||
Blade Length 3.5mm | ||
Overall Length 100mm | ||
Standards/Approvals No | ||
- Land van herkomst:
- DE
WAGO Screwdriver, Slotted Tip, 100mm Length - 210-658
Make your fastening jobs a cinch by turning to this screwdriver from WAGO. It has a blade with a slotted tip, which you can use to crimp and remove connectors in an actuator or sensor terminal block (297-5962). The slight angle of the shaft allows you to access these connectors in awkward areas without any bother. A compact blade size of 3.5 x 0.5mm also makes it an ideal choice for reaching into areas that are difficult to access.
Features & Benefits
• Partially insulated shaft for enhanced operator safety
• Light weight of 10.2g so you can carry it in your pocket or toolbelt
• Bright green handle lets you identify it in the blink of an eye
• Hanging hole for convenient storage when not in use
Applications
• Electrical engineering
• Industrial maintenance
• Electronics design
Why should I use this tool rather than a standard screwdriver?
This tool has been specifically designed for WAGO terminal blocks, making access to connections convenient and straightforward. Using a standard, straight screwdriver might result in ineffective crimping or even damage to the connection or terminals.