SKF Thermoplastic Elastomer Seal, 50 mm ID, 75.5 mm OD, 12.5 mm
- RS-stocknr.:
- 506-684
- Fabrikantnummer:
- TSN 511 L
- Fabrikant:
- SKF
Afbeelding representeert productcategorie
Bulkkorting beschikbaar
Subtotaal (1 eenheid)*
€ 21,95
(excl. BTW)
€ 26,56
(incl. BTW)
Voeg 4 eenheden toe voor gratis bezorging
Tijdelijk niet op voorraad
- Verzending 18 stuk(s) vanaf 06 april 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 21,95 |
| 5 - 9 | € 21,08 |
| 10 - 24 | € 20,63 |
| 25 + | € 20,20 |
*prijsindicatie
- RS-stocknr.:
- 506-684
- Fabrikantnummer:
- TSN 511 L
- Fabrikant:
- SKF
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SKF | |
| Inside Diameter | 50 mm | |
| Product Type | Seal | |
| Outside Diameter | 75.5 mm | |
| Seal Type | Four Lip Seal | |
| Thickness | 12.5mm | |
| Seal Material | Thermoplastic Elastomer | |
| Alles selecteren | ||
|---|---|---|
Merk SKF | ||
Inside Diameter 50 mm | ||
Product Type Seal | ||
Outside Diameter 75.5 mm | ||
Seal Type Four Lip Seal | ||
Thickness 12.5mm | ||
Seal Material Thermoplastic Elastomer | ||
Vrijgesteld
- Land van herkomst:
- SE
SKF Double Lip Seal, Type L, Polyurethane Construction - TSN511L
Want to keep your bearing running smoothly with minimum hassle? Use this double-lip seal from SKF to keep contamination firmly locked out. As a Type L seal, it's suitable for use with plummer-block-housed units. For easy compatibility, it measures 255 (L) x 95mm (D) and has an overall height of 128mm, an inside diameter of 50mm and a centre height of 70mm. The 16mm holes for mounting are located 210mm apart (centre to centre), which makes it a precise fit for standard bearings.
Features & Benefits
• Additional dust lip makes it suitable for use in dirty and dusty environments
• Flexible, oil-resistant PU material is hardwearing to give you a long service life
• Suitable for use with shafts rotating at peripheral speeds of up to 13 m/s (2600 ft/min), supporting high-speed applications
Applications
• Flour mills
• Materials handling
• Marine equipment
What's a plummer block?
A plummer block is a pedestal-mounting block that houses a bearing. It holds the outer ring of the bearing still while allowing the inner ring to rotate. When properly installed they can last a long time without needing to be replaced.