SKF Nitrile Rubber Seal, 100mm ID, 120mm OD, 12mm
- RS-stocknr.:
- 266-8790
- Fabrikantnummer:
- 100X120X12 HMS5 RG
- Fabrikant:
- SKF
Subtotaal (1 verpakking van 5 eenheden)*
€ 24,16
(excl. BTW)
€ 29,235
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 75,00
Op voorraad
- 20 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Per verpakking* |
|---|---|---|
| 5 + | € 4,832 | € 24,16 |
*prijsindicatie
- RS-stocknr.:
- 266-8790
- Fabrikantnummer:
- 100X120X12 HMS5 RG
- Fabrikant:
- SKF
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SKF | |
| Inside Diameter | 100mm | |
| Outside Diameter | 120mm | |
| Seal Type | Rotary Shaft Seal | |
| Thickness | 12mm | |
| Seal Material | Nitrile Rubber | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | +100°C | |
| Alles selecteren | ||
|---|---|---|
Merk SKF | ||
Inside Diameter 100mm | ||
Outside Diameter 120mm | ||
Seal Type Rotary Shaft Seal | ||
Thickness 12mm | ||
Seal Material Nitrile Rubber | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature +100°C | ||
- Land van herkomst:
- CN
SKF Seal, Nitrile Rubber, 120mm Outside Diameter - 100X120X12 HMS5 RG
This radial shaft seal by SKF is designed with a rubber outside diameter and a single sealing lip, reliable for use with oil or grease. It accommodates misalignment and offers a high pumping rate along with a garter spring for the correct radial load.
Features & Benefits
• Radial shaft seal with rubber outside diameter and single sealing lip
• Designed for oil or grease applications
• Accommodates misalignment
• High pumping rate
• Garter spring for maintaining the correct radial load
• Designed for oil or grease applications
• Accommodates misalignment
• High pumping rate
• Garter spring for maintaining the correct radial load
Applications
• Ideal for sealing between rotating and stationary machine components
• Reliable for components in relative motion
• Used for housing bore diameters of 120mm, seal widths of 12mm, and shaft diameters of 100mm
• Reliable for components in relative motion
• Used for housing bore diameters of 120mm, seal widths of 12mm, and shaft diameters of 100mm
Can it accommodate misalignment?
Yes, this seal is designed to accommodate misalignment, making it versatile for various applications.
Will it work for both rotating and stationary machine components?
Yes, it is suitable for sealing between both rotating and stationary machine components.
Is it suitable for oil or grease applications?
Yes, it is specifically designed for use with oil or grease.